HP T3204 manual Unloading media

Page 23

unloading media

6To remove roll±fed media, proceed as

follows:

a.Roll the media onto the media hub or onto the rewind hub, as appropriate.

b.If you have rolled the media onto the media hub, slide the roll of media off the hub.

3±Inch Core

Adaptors

Media Hub

Assembly

Thumbscrews

c.If you have rolled the media onto the rewind hub, lower the lower right-hand front panel.

Unroll the media from the hub, and remove the clasp

d.Lift and snap the lower right-hand front panel closed.

Media

Supply Roll

Media Hub	Media
Assembly	Retainer

Rewind Hub

7To remove fan±folded media, proceed as follows:

a.If the rewind hub was not being used, simply pull the media through

the loading slot and out of the printer.

Go on to step 8.

b.If the rewind hub was being used, finish rolling the media onto the hub.

Operator's Guide

15

Image 23

Contents GG GG Page 136578±001, Rev B US and Canada Radio Interference Note Ri rrkTrademarks About thi Opertor Guide Table of ontents Basic Operating ProceduresPage Aution Powering On the PrinterStatus Indicator Lights Using the primary operator panelCancel On LINE/PAUSE Printing Modes Loading Media Metal HUB Loading mediaTo load fan±folded media, proceed as follows Printhead Media Hinge Latch Guide Plate Noe Loading media Loading media Loading media Unloading Media Unloading media Right-Hand Front Panel Installing the Ribbon Installing the ribbon Hook Removing the Ribbon Removing the ribbon Printhead Hinge Latch Plate Selecting Print Mode Selecting Gap Sensor Setting Print Intensity Slctin Mia Hanlin To enter the media handling To view the desired Selecting media handlingSelecting the Ribbon Saver Leaning the Printer Cleaning the Outside of the CabinetCleaning the printer Prom Fault Fault MessagesMedia Fault Fault messagesPage 6662