HP 2200 manual Dimm

Continuable Attention Errors (continued)

Type of Error Light Pattern	Recommended Action
Personality/Job	! Turn the printer off. Press and hold
Related Error	the GO button. Turn the printer on
	and continue to hold the GO button
	for approximately five seconds, but
	no longer than fifteen seconds. The
	Attention light will come on during
	this process. Release the Go
	button. If both the Attention and
	Ready lights came on before you
	released the Go button, then you
	must repeat the procedure.
	! Remove or replace the language
	DIMM.
	! Contact your HP service
	representative. See HP Customer
	Care (Service and Support) or
	Worldwide Sales and Service
	Offices.
Buffer Flow	! The cable between the printer and
	computer has a bad connection or
	the cable is of poor quality. Check
	the cable connections to see if they
	are secure. Make sure you are using
	a high-quality cable.
	! Contact your HP service
	representative. See HP Customer
	Care (Service and Support) or
	Worldwide Sales and Service
	Offices.
General	Contact your HP service representative.
Continuable Error	See HP Customer Care (Service and
	Support) or Worldwide Sales and
	Service Offices.

98 Chapter 4 Problem Solving EN