HP 2200 manual Labels, Label Construction

Labels

CAUTION

Note

To avoid damaging the printer, use only labels recommended for laser printers

To prevent serious jams, always use Tray 1 to print labels and always use the rear output bin.

Never print on the same sheet of labels more than once or print on a partial sheet of labels.

Label Construction

When selecting labels, consider the quality of each component:

!Adhesives: The adhesive material should be stable at 200° C (392° F), the printer’s fusing temperature.

!Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing serious jams.

!Curl: Prior to printing, labels must lie flat with no more than 13 mm (.5 in.) of curl in any direction.

!Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

For more information, see Printing on Labels.

In the printer driver select Optimize for: and choose labels in the drop-down box (see Optimizing for Media Types). For non-Windows operating systems, this feature is also available in HP Web JetAdmin.

EN Appendix B Media Specifications 143