HP 2200 manual Tray 2 or Optional Tray 3 Paper Feed Area

1

Tray 2 or Optional Tray 3 Paper Feed Area

2

3

4

Note

If paper has entered the toner cartridge area, follow the instructions in Toner Cartridge Area. It is easier to remove paper from the toner cartridge area than the paper feed area.

1Slide out Tray 2 to expose the jammed paper.

2Remove any misfed paper by pulling it out by the visible edge. Make sure that all of the paper is aligned in the tray (see Loading Media into Tray 2 or Optional 250- sheet Tray 3). If Tray 3 is installed, remove any misfed paper and make sure that all of the paper is aligned in that tray.

3If the paper is jammed in the paper feed area and cannot be accessed from the toner cartridge area, grasp the paper and carefully pull it free from the printer.

4For the 250-sheet tray, push the paper down to lock the metal paper lift plate into place and slide the tray back into the printer.

Note

To reset the printer and continue printing, open the top cover all the way, then close it.

If the Attention light does not go out, there is still jammed paper inside the printer. Check the toner cartridge, rear output, and duplexer areas for paper jams.

EN Chapter 4 Problem Solving 81