HP 2200 manual

4

5

4Place the envelopes into the tray short-edge in, print-side up. The stamp end must enter the printer first.

5Slide the width guides inward until they lightly touch the envelope stack without bending it. The envelopes should be centered between the paper guides and under the tabs on the paper width guides.

Note

If the envelope has a flap on the short edge, this edge must enter the printer first.

You may experience some paper jams when using any media with a length less than 178 mm (7 in.). This may be caused by paper that has been affected by environmental conditions. For optimum performance, make sure you are storing and handling the paper correctly (see Printing and Paper Storage Environment). Using media from another manufacturer may

also help.

42 Chapter 2 Printing Tasks EN