3.Open the DVD icon on your desktop.
4.Open the Install icon for your printer (HP Designjet T1100ps or T1100).
5.Open the Mac OS X HP Designjet Installer icon.
6.Follow the instructions on your screen. You are recommended to use the Easy Install option.
7.The printer software is installed, including the printer driver, HP Printer Utility, and HP Color Center.
8.When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a connection to your printer. Follow the instructions on your screen.
9.When you reach the Select Printer screen, look for your printer's URL (which you noted in step 1) in the Printer Name column.
●If you find the right printer name, scroll sideways if necessary to see the Connection Type column, and check that it shows IP Printing. Then highlight that line. Otherwise, continue searching further down the list.
●If you cannot find your printer name with an IP Printing connection type, check the box My printer is not in the list.
Click Continue.
10.Continue following the instructions on the screen. When you reach the Printer Queue Created screen, click Quit to exit, or Create New Queue if you want to connect another printer to the network.
11.When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the DVD.
Installing the software
ENWW | Connect to a network (Mac OS) 17 |