HP T1100 manual Recalibrating the paper advance procedure

Page 168

Paper issues

You can check the paper advance calibration status of the currently loaded paper at any time by pressing

the View loaded paper key on the front panel. The status may be one of the following.

●DEFAULT: This status appears when loading any paper that has not been calibrated. HP papers in the Front Panel have been optimized by default and unless you experience image quality problems in your printed image such as banding or graininess it is not recommended to recalibrate the paper advance.

●OK: This status indicates that the loaded paper has been calibrated before. However you may need to repeat the calibration if you experience image quality problems such as banding or graininess in your printed image.

NOTE: Whenever you update the printer’s firmware, the paper advance calibration values are reset to factory default, see Update the firmware on page 138.

CAUTION: Transparent papers and films must be calibrated using Image Quality Maintenance

menu icon , then Paper advance calibration > Adjust paper advance, from step four in the Recalibrating the paper advance procedure.

Recalibrating the paper advance procedure

1.Press the Menu key to return to the main menu and select the Image Quality Maintenance menu

icon , then Calibrate paper advance. The printer automatically recalibrates the paper advance and prints a paper advance calibration image.

2.Wait until the front panel displays the status screen and re-print your print.

NOTE: The recalibration procedure takes approximately three minutes. Do not worry about the paper advance calibration image. The front-panel display shows any errors in the process.

If you are satisfied with your print continue using this calibration for your paper type. If you see improvement in your print, continue with step three. If you are dissatisfied with the recalibration, return to the default calibration, see Return to default calibration on page 157.

3.If you would like to fine-tune the calibration or are using a transparent paper, press the Menu key

to return to the main menu and select the Image Quality Maintenance menu icon , then Paper advance calibration > Adjust paper advance.

4.Select the percentage of change from -100% to 100%. To correct light banding, decrease the percentage. To correct dark banding, increase the percentage.

5.Press the OK key on the front panel, to save the value.

6.Wait until the front panel displays the status screen and re-print your print.

156 Chapter 14 Troubleshooting paper issues

ENWW

Page 167 Page 169
Image 168
Page 167 Page 169
Contents HP Designjet T1100 Printer Series Using your printer Page HP Designjet T1100 printer series Legal notices Table of contents Personalizing the printer Color management Job queue management Troubleshooting paper issues Troubleshooting ink cartridge and printhead issues 203 Enww Introduction Safety precautions Using this guideHP Start-Up Kit IntroductionUse and maintenance TroubleshootingAccessories, support, and specifications GlossaryPrinters main features Printers main componentsFront view Front panel Rear viewDirect access keys Printer software Printers internal printsPrinters internal prints Introduction Installing the software Choose which connection method to use Connect to a network WindowsConnect directly to a computer Windows Uninstall the printer software Windows Connect to a network Mac OSPrinter sharing considerations Bonjour/Rendezvous connectionOpen the Mac OS X HP Designjet Installer icon TCP/IP connection Click ContinueInstalling the software Connect directly to a computer Mac OS Uninstall the printer software Mac OS Sharing the printerInstalling the software Setting up the printer Introduction Handle paper conflictsTurn nesting on and off Turn usage information on and off Set or delete the security password Turn alerts on and offRequire account ID Set Windows driver preferencesSetting up the printer Personalizing the printer Turn the printer on and off Change the language of the front-panel display Access the Embedded Web Server Change the language of the Embedded Web ServerChange the sleep mode setting Configure network settingsTurn the buzzer on and off Change the front-panel display contrastChange the graphic language setting Ascii Personal settings Paper handling General advice Load a roll onto the 24-inch spindleHandlingPaper Load a roll onto the 44-inch spindle Load a roll onto the 44-inch spindle Paper handling Easy loading procedure Load a roll into the 24-inch printerPaper handling HandlingPaper Paper menu procedure Load a roll into the 44-inch printer Paper handling Paper handling Paper menu procedure Unload paper key procedure with paper on the roll Paper menu procedure with paper on the rollUnload a roll Roll out of paper procedure Load a single sheetEasy loading procedure Paper menu procedure Unload a single sheet Select Paper load Select Load sheetUnload paper key procedure View information about the paperPaper profiles Print on loaded paperMaintain paper Change the drying time Turn the automatic cutter on and offFeed and cut the paper Feed and cut the paper Paper handling Printing Using the Embedded Web Server to print files Create a print jobSelect print quality Select paper sizeSelect margins options Custom paper sizesPrint with shortcuts Rescale a print Change the treatment of overlapping lines Preview a printPrint a draft High-quality printingIf you have a high-resolution image Print in gray shadesPrint with no margins Print with crop lines When does the printer try to nest pages? Use paper economicallyNest jobs to save roll paper Use ink economically What pages can be nested?Which pages qualify for nesting? How long does the printer wait for another file?Use ink economically Printing Color management How colors are represented Summary of the color management processColor calibration Color management from printer drivers Color management options Printer emulationColor adjustment options Printing in colorColor management from printer drivers T1100ps only HP Professional Pantone EmulationColor emulation Cmyk color emulationColor management from the Embedded Web Server Submit Job optionsPrinting Pantone swatch books T1100 and T1100ps optionsColor management from the front panel Color management from the front panel Color management Practical printing examples Using Adobe Acrobat Print a draft for revision with the correct scalePrint a draft for revision with the correct scale Using Autodesk Design Review Print a projectUsing Windows Explorer to print Autodesk Design Review files Using AutoCAD ExamplesPrinting Printing examples Select Clip contents by margins Printing examples Using the Embedded Web Server to submit files Using printer emulationUsing clip contents by margins Print a presentationPrint a presentation Select Show preview before printing Printing examples Using Adobe Photoshop Select File Print with Preview Printing examples Print and scale from Microsoft Office Using PowerPoint Using Project Printing examples Using Excel Printing examples Job queue management Job queue Job previewSelect when to print a job in the queue Turn off the job queueIdentify a job in the queue Prioritize a job in the queue Delete a job from the queueReprint or copy a job in the queue Job status messages Remove a holdJob queue Retrieving printer usage information Get printer accounting information Check printer usage statisticsCheck ink and paper usage for a job Printer statistics with the Embedded Web ServerInk and paper statistics with the Embedded Web Server Printer usage Handling ink cartridges and printheads Ink menu procedure About the ink cartridgesCheck the ink cartridges status Remove an ink cartridge Insert an ink cartridge About the printheads Check the printhead status Remove a printheadRemove a printhead Ink and printheads Insert a printhead Ink and printheads Ink and printheads Ink and printheads Maintaining the printer Clean the exterior of the printer Check printer statusReplace the cutter Replace the cutter Maintaining the printer Maintaining the printer Maintaining the printer Maintain the ink cartridges Move or store the printerUpdate the firmware Update the softwarePrinter maintenance kits Secure Disk Erase Maintaining the printer Accessories How to order supplies and accessories Order ink suppliesOrder paper How to order supplies and accessories 3Roll paper Order accessories HP Self-Adhesive Material and LaminateIntroduction to the accessories StandSpindle Jetdirect print serverTroubleshooting paper issues General unsuccessful roll load issues Paper cannot be loaded successfullyUnsuccessful roll load with 24-inch printer Paper loading error messages Unsuccessful roll load with 44-inch printerUnsuccessful sheet load Paper type is not in the driver Transparent or translucent paperGlossy paper Matte PaperBlack ink is easily removed when touched HP Banners with TyvekPaper has jammed Paper has jammed Printer displays out of paper when paper is available Prints do not fall nicely into the basketPaper is cut when the print has been completed Cutter does not cut wellRoll is loose on the spindle Strip stays on the output tray and generates jamsRecalibrating the paper advance procedure Return to default calibration Icon , then Paper advance calibration Reset paper advancePaper issues Troubleshooting print-quality issues Print quality troubleshooting wizard Horizontal lines across the image banding Lines are too thick, too thin, or missing Lines appear stepped or jaggedLines print double or in the wrong colors Lines are discontinuous Lines are blurred Line lengths are inaccurateWhole image is blurry or grainy Paper is not flatPrint is scuffed or scratched Ink marks on the paperHorizontal smears on the front of coated paper Black ink comes off when you touch the print Edges of objects are stepped or not sharpInk marks on the back of the paper Edges of objects are darker than expected Horizontal lines at the end of a cut sheet printVertical lines of different colors White spots on the printColors are inaccurate Colors are fading Image is incomplete clipped at the bottomImage is clipped Image Diagnostics Print Some objects are missing from the printed imageImage Diagnostics Print Corrective action If you still have a problem Print-quality issues Troubleshooting ink cartridge and printhead issues Cannot insert an ink cartridge Ink cartridge status messagesCannot insert a printhead Clean the printheads Remove the printhead, see Remove a printhead onClean the printhead drop detector Clean the printhead drop detector Align the printheads Reinsert printheads procedure Image Quality Maintenance menu procedureScanning errors during alignment Printhead status messagesTroubleshooting general printer issues Printer does not print Printer seems slowPrinter printed on undesirable paper Communication failures between computer and printer Cannot access the Embedded Web Server Automatic file system checkAn AutoCAD 2000 memory allocation error No output when printing from Microsoft VisioUnavailable driver features when printing from QuarkXpress Printer alerts Front-panel error messages 1Text messagesFront-panel error messages HP Customer Care HP Professional Services HP Care Packs and Warranty ExtensionsKnowledge Center HP Start-Up KitHP Installation HP Instant SupportHP Proactive Support Contact HP Support Telephone numbersContact HP Support HP Customer Care Printer specifications Functional specifications 1HP 72 ink suppliesPhysical specifications Memory specificationsPower specifications Ecological specificationsEnvironmental specifications Acoustic specificationsGlossary Enww Index RGBHP-GL/2 Access Enww
Related manuals
Manual 7 pages 27.86 Kb
Top Page Image Contents