Easy loading procedure
1.Standing in front of the printer, open the sheet tray. If the sheet is long, extend the tray. TIP: If the tray is difficult to open, try opening from behind the printer.
NOTE: The extensions are seven cm and snap in place.
2.Insert the sheet into the feeder. Load your sheet aligned with the load line and insert until the paper will not continue, with thicker sheets you feel resistance. The printer detects the sheet in three seconds. A countdown begins on the
WARNING! Do not push your fingers inside the printer's paper path.
3.After the countdown, the paper feeds into the printer. Guide the sheet into the printer; this is especially important with thicker papers.
4.The
NOTE: If you select roll, the sheet will not load. handlingPaper
ENWW | Load a single sheet 51 |