HP Performance Optimized Data Center (POD) 20cp manual Description Yes Initial

Item	Description	Yes	No	N/A	Initial
8. Clearances	Inspect the proposed installation site to confirm clearance
	requirements for installation and serviceability per the HP
	POD 20c specifications. Necessary clearances are
	determined, in part, based on the specific installation plans
	and infrastructure design. Location, orientation, and planned
	utilization can affect the necessary clearances. Consider
	future planning for the space around the installation site.
9. Support	Evaluate the HP POD 20c installation site in relation to the
infrastructure	planned support infrastructure location. Conduit lengths and
location	the utility pathway design must be taken into consideration in
	the planning stages. The proposed support infrastructure
	design and the location of required utilities are discussed
	with the customer's site engineering personnel to identify
	elements that can impact the HP POD 20c installation site
	decisions.
10. Support	Evaluate the proposed installation site for the HP POD 20c
infrastructure for	and the support infrastructure for access requirements. The
access requirements	evaluation is based on the information provided by the
	customer at the time of the site visit. In the absence of
	installation-specific information, general requirements are
	used as the basis for the evaluation. The delivery path is
	visually examined and discussed with the customer's site
	engineering personnel to identify obstacles to installation.
11. Site engineering	Conduct interviews with the customer's site engineering
interviews	personnel and site facilities personnel to gather information
	related to the origin of the power source and network
	services that are proposed for use with the HP POD 20c. HP
	must visually inspect the proposed power protection
	equipment. Means of delivery, connections, and pathways
	are documented.
12. Capacity of	Based on the review of customer-provided site
electrical	documentation (such as single-line and as-built drawings),
infrastructure	examine equipment panels and monitoring system data, as
	available. HP must determine whether adequate capacity
	exists in the current electrical infrastructure to be used or if
	additional study is required. Determine if the level of
	redundancy that is required as stated by the site engineering
	personnel can be provided by using the existing
	infrastructure. This takes into consideration the proposed
	installation site of the HP POD 20c, the potential HP POD
	20c payload, and the customer stated redundancy
	requirement. Components can include generators, UPSs,
	and switch gear.
13. Chilled water	Determine the overall chilled water capacity, available flow
infrastructure	rates, and supply/return temperature restrictions. Determine
	if any site specific requirements mandate additional chilled
	water equipment, such as heat exchangers or mixing
	apparatus. Locate any existing or planned supply/return
	headers.
14. Access control	Conduct interviews with the customer site engineering
	personnel to determine the level of access control that is
	required for the HP POD 20c and its infrastructure. The
	proposed installation site is assessed for suitability in relation
	to the customer requirements.
	Appendix A: HP site assessment 27