B. Using Regular Spits
Hickory Industries, Inc.
Figure 15. Inserting Single Bottom Skewer
Attach a single skewer with a thumb screw at least 1/ 2" from the square end of the spit. The skewer must be on the round section of the spit.
Figure 16. Fastening Bottom Skewer
Use the "T" shaped tool supplied with the unit to tighten the thumb screw. This will prevent the bottom skewer from sliding off the screw.
Figure 17. Using the Spit Holder
Even though the chickens can be spitted on a work table, the use of the Spit Holder (Hickory Part 195) will make the spitting process much easier.
4900 Westside Avenue, North Bergen, New Jersey 07047 | N/45 Series Manual12/00 |
Tel: [201] | Page 28 of 38 |