Hickory Industries, Inc.
Figure 24. Inserting Double Skewers
With the first chicken in place, insert a double skewer down the length of the spit into the shoulders of the
first chicken. No thumb screw is required for the double skewers!
WARNING! When driving the double skewer into the chicken, do not exert pressure from the end of the prongs! These are sharp and will pierce a finger or hand if not careful. Only apply pressure at the bottom of the "U" shaped half of the skewer!
Figure 25. Double Skewer in Place
With the double skewer in place, insert the next chicken down the length of the spit and position the chicken as previously described.
Figure 26. Loaded Spit
When the loading of the chickens is complete, the end of the spit must be locked in place with another single skewer.
4900 Westside Avenue, North Bergen, New Jersey 07047 | N/45 Series Manual12/00 |
Tel: [201] | Page 31 of 38 |