HP Hickory Rotis N/45WDG Description of the Electrical Connection, Electrical Diagram All Models

Page 14

Hickory Industries, Inc.

When first installing, after repairing, or after cleaning the units, it is important to make sure that all components are properly in place.

a.There should be a total of 9, evenly spaced ceramic bricks sitting above each main pipe burner.

b.The ceramics must be sitting directly on the burners. These ceramic

bricks should also be placed so that they fit between the ceramic support rods.

c.The burner pipes should not have any holes (flames) directly below the pilot

burner assembly. If holes (flames) are present, they will overheat the thermocouple or blow out the pilot flame, preventing the main burner from staying lit.

1.14Description of the Electrical Connection

The electrical connections are to be made in accordance to local and national codes.

All gas machines operate with 120 Volt, single phase, 60 Hz. A NEMA 5-15P plug is supplied with the units.

All pertinent electrical information can be taken from the electrical diagram.

1.15Electrical Diagram - All Models

	L
	M
L	N

4900 Westside Avenue, North Bergen, New Jersey 07047	N/45 Series Manual12/00
Tel: [201] 223-0050 Fax: [201] 223-0950	Page 14 of 38

Image 14

Contents Hickory Rotisseries Index Inital Steps II. Operating Instructions Electrical Connection Placing the MachineAssembling the Machine Gas ConnectionII Installation Instructions General Information Description of the Data PlateMachine Drawings and Dimensions Manifold Valve Conversion and Adjustment InstructionsVerification for use with Natural Gas Natural Gas Flow Table Hickory Industries, Inc Venturi Assembly Changing Gas Orifices Changing the Main Gas OrificeNatural Gas 3211*Verbally confirm model 45 when ordering Pilot Burner Assembly3221* Verbally confirm model 45 when ordering Changing the Pilot OrificeChecking the Connected Gas Pressure Nominal Pressure Problem Cause Solution Testing or checking for safetyElectrical Diagram All Models Description of the Electrical ConnectionParts List for N /4 5WDG Qty Description Material Length Size ManufacturerParts List for N / 45WDG Contd Following parts are not shown in the diagramsHickory Industries, Inc Hickory Industries, Inc Hickory Industries, Inc II. Operating Instructions Start Up Shut DownWorking with the Rotisserie Manifold Valve Knob in Pilot PositionHickory Industries, Inc Using Angle Spits Chickens TiesTrussing Legs Pop-up Thermometer Using the Angle Spit Incorrectly Spitted Chicken Inserting Single Bottom Skewer Fastening Bottom SkewerInserting Chicken Locking Wings Inserting Double Skewers Completing the Load Hickory Industries, Inc Checking Chickens for Doneness Cooking other ProductsAt The End of Each Day Maintenance Procedures for Continuous Cook Rotisseries Hickory Industries, Inc Hickory Industries, Inc