HP Hickory Rotis N/45WDG manual Checking Chickens for Doneness, Cooking other Products

Page 34

Hickory Industries, Inc.

7.Checking Chickens for Doneness

Depending on the model being used, a 2 1/2 lb. chicken will take between 50 minutes and 1 hour 20 minutes to cook in a pre-heated oven when the thermostat is set for MAXIMUM. By using a stem type thermometer, the operator MUST determine the interior temperature of the chicken to test for doneness. Chicken is done at 185°F. MAKE SURE TO REMOVE THE SKEWERS FROM

BETWEEN THE CHICKENS PRIOR TO SERVING IT TO CUSTOMERS.

8. Cooking other Products

These units can be used to cook anything from quail to turkeys, pigs, lamb, goat, vegetables, potatoes, fish and much more. The baskets can be used for the cooking of chicken parts, brochettes and any- thing else that cannot go on a spit. A variety of other accessories is also available for specific types of products. Please consult the factory for a complete list of cooking accessories.

9.Cleaning Instructions for Continuous Cook Rotisseries

The most effective maintenance procedure that you can perform will be the daily clean- ing procedure

Prior to First Cook:

While the oven is still cold – spray all interior panels with KOTE.

FOR GAS MODELS

Using the shield provided, cover the top row of ceramics and spray the interior of that area with KOTE. Repeat the process covering the remaining rows of ceramics.

DO NOT SPRAY KOTE DIRECTLY ON THE CERAMICS OR THE PILOT LIGHTS.

FOR ELECTRIC MODELS

When spraying KOTE near the elements, adjust the spray nozzle pattern and try not to spray directly on the elements.

Remove the wire rack located above the drip pan and spray the sides of the drip pan with KOTE. Replace the wire rack and spray it with KOTE.

After Each Cooking Cycle

Spray the inside of the glass doors with an approved glass cleaner and wipe with a soft cloth.

Drain the greasy water from the drip pan and replenish with fresh water.

4900 Westside Avenue, North Bergen, New Jersey 07047

N/45 Series Manual12/00

Tel: [201] 223-0050 Fax: [201] 223-0950

Page 34 of 38

Image 34
Contents Hickory Rotisseries Index Inital Steps II. Operating Instructions Electrical Connection Placing the MachineAssembling the Machine Gas ConnectionII Installation Instructions General Information Description of the Data PlateMachine Drawings and Dimensions Verification for use with Natural Gas Conversion and Adjustment InstructionsManifold Valve Natural Gas Flow Table Hickory Industries, Inc Venturi Assembly Changing Gas Orifices Changing the Main Gas OrificeNatural Gas 3211*Verbally confirm model 45 when ordering Pilot Burner Assembly3221* Verbally confirm model 45 when ordering Changing the Pilot OrificeChecking the Connected Gas Pressure Nominal Pressure Problem Cause Solution Testing or checking for safetyElectrical Diagram All Models Description of the Electrical ConnectionParts List for N /4 5WDG Qty Description Material Length Size ManufacturerParts List for N / 45WDG Contd Following parts are not shown in the diagramsHickory Industries, Inc Hickory Industries, Inc Hickory Industries, Inc II. Operating Instructions Start Up Shut DownWorking with the Rotisserie Manifold Valve Knob in Pilot PositionHickory Industries, Inc Using Angle Spits Chickens TiesTrussing Legs Pop-up Thermometer Using the Angle Spit Incorrectly Spitted Chicken Inserting Single Bottom Skewer Fastening Bottom SkewerInserting Chicken Locking Wings Inserting Double Skewers Completing the Load Hickory Industries, Inc Checking Chickens for Doneness Cooking other ProductsAt The End of Each Day Maintenance Procedures for Continuous Cook Rotisseries Hickory Industries, Inc Hickory Industries, Inc