Hickory Industries, Inc.
1.9.2Changing the Pilot Orifice
1.To reach the pilot burner, open the sliding glass doors, the sliding or hinged metal door, remove all spits, as well as all ceramics.
2.Before removing, mark the position of the support bracket on the side wall.
3.Loosen the pilot burner assembly by removing the two screws which attach each pilot burner (support bracket) to the main body of the machine.
4.With the assembly loose, carefully pull the entire assembly forward about 6".
Pilot Orifice
Pilot Flame
Openings
Thermocouple
Pilot Burner Assembly
5.Loosen the gas line connection to the pilot orifice with a 7/16" wrench. Carefully separate the gas line from the pilot burner. From the pilot burner, carefully remove the pilot orifice using a 1/2" wrench.
6.Reassemble the pilot burner using the new pilot orifice and place the support bracket in its original position. The following pilot orifices are to be used with each type of gas.
Pilot Orifice | Marking |
|
LPG | 3221* Verbally confirm model 45 when ordering. | |
Natural Gas | 3211*Verbally confirm model 45 when ordering. | |
|
| |
4900 Westside Avenue, North Bergen, New Jersey 07047 | N/45 Series Manual12/00 | |
| Tel: [201] | Page 11 of 38 |