:CTYPe? SYSTem:CTYPe? <number> returns the module (card) type of a selected module in a switchbox.
Parameters
Parameter Name  | Parameter Type  | Range of Values  | Default Value  | 
  | 
  | 
  | 
  | 
number  | numeric  | 01 - 99  | N/A  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
Comments Microwave Switch Module Model Number:
The SYSTem:CTYPe? <number> command returns (for both modules):
HEWLETT-PACKARD,E1368A,0,A.01.00 
Note: The 0 after the module number is the serial number of the module (always 0). A.01.00 is an example of the module revision code number.
Example Reading the Model Number of a Card #1 Module
SYST:CTYP? 1  | Returns the model number.  | 
:ERRor? SYSTem:ERRor? returns the error numbers and corresponding error messages in the error queue of a switchbox. See Appendix C for a listing of the switchbox error numbers and messages.
Comments ∙ Error Numbers/Messages in the Error Queue: Errors generated by a switchbox store an error number and corresponding error message in the error queue. Each error message can be up to 255 characters long.
∙Clearing the Error Queue: An error number/message is removed from the queue each time the SYSTem:ERRor? command is sent. The errors are cleared 
∙Maximum Error Numbers/Messages in the Error Queue: The queue holds a maximum of 30 error numbers/messages for each switchbox. If the queue overflows, the last error number/message in the queue is replaced by 
∙*RST Condition: *RST does not clear the error queue.
Example Reading the Error Queue
SYST:ERR?  | Query the error queue, read and  | 
  | print the numbers/message.  | 
66 HP E1368A/69A/70A Command Reference | Chapter 4  |