♦Do not move large racks by yourself. Due to the height and weight of the rack, Compaq recommends a minimum of two people to accomplish this task.
♦Before working on the rack, be sure the leveling jacks (feet) extend to the floor and that the full weight of the rack rests on the floor.Also install stabilizing feet on a single rack or join multiple racks together before starting work.
♦Always load the rack from the bottom up, and load the heaviest item in the rack first.This makes the rack bottom- heavy and helps prevent the rack from becoming unstable.
♦Ensure that the rack is level and stable before extending a component from the rack.
♦Extend only one component at a time. The rack may become unstable if more than one component is extended.
♦Use caution when pressing the compo- nent rail release latches and sliding a component into the rack.The slide rails could pinch your fingers.
♦Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80% of the branch circuit rating.
Precautions for Products with External Television Antenna Connectors
In addition to the general precautions de- scribed earlier in this chapter,be sure to observe the following precautions when using external television antennas with your product.Failure to observe these precautions could result in fire, bodily injury,and damage to the equipment.
Compatibility
Compaq television tuner cards with antenna connections should be used only with Compaq personal computers that are intended for home use.
ExternalTelevisionAntenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded to protect against voltage surges and
39