![](/images/new-backgrounds/1241711/24171143x1.webp)
Table 1-1 Supported brands of paper for this device (continued)
Tested | ||
| optimized for this device) |
|
|
|
|
Speciality paper |
| Outside North America |
HP Office Paper - Prepunched |
| Clairealfa White |
HP Labels |
| IP Rey Office |
|
| IP Duo Colourcopy |
|
| Mondi IQ Economy |
|
| |
|
| Portucel Navigator Universal |
|
| |
|
| UPM Office copy/print |
|
| Xerox Premier |
|
| Reflex Pure White |
|
|
|
Guidelines for using specialty papers
Table 1-2 Guidelines for specialty papers
Paper type | Guidelines |
|
|
Labels | Load labels only in Tray 1. Load labels with the front side facing down. |
| Labels should lie flat with no more than 13 mm (0.5 inch) of curl in any direction. |
| Use only full sheets of labels. If sheets have spaces between the labels, labels can peel off, |
| which can cause jams that are difficult to remove. |
| Do not use labels that have wrinkles, bubbles, or that are peeling off the backing paper. |
|
|
Cardstock | Load heavier cardstock, up to 220 g/m² (80 lb cover) cardstock, only in Tray 1. |
| Cardstock up to 180 g/m² (67 lb cover) can be loaded in any tray. |
| Cardstock should have a smoothness rating of 100 to 180 Sheffield. |
| Cardstock should lie flat with no more than 13 mm (0.5 inch) of curl in any direction. |
| Do not use cardstock that is wrinkled, nicked, or otherwise damaged. |
|
|
HP Edgeline Glossy | Load HP Edgeline Glossy paper only in Tray 1. |
| Fan the stack of paper before placing the sheets in the tray. This helps prevent the sheets from |
| sticking together. |
|
|
Transparencies | The device does not support transparencies. Do not try to print on them. |
|
|
Envelopes | The device does not support envelopes. Do not try to print on them. |
|
|
Recommended paper for specific types of documents
The device supports many types of paper. Use the information in the following table to select a type of paper for specific types of documents.
14 Chapter 1 Device basics | ENWW |