HP 1020 Fax, 1020xi Fax Receiving a fax, Scan & Fax, TEL Answer Mode, FAX or TAM/FAX Answer Mode

Quick Start

Scan & Fax

1Place the document to be sent face down in the document tray.

2Press Scan & Fax.

3Dial the number by using one of these methods:

•Entering the number and pressing Start/Copy.

•Pressing a One Touch button.

•Pressing the Speed Dial button, entering a speed dial code and pressing Start/Copy. See “Using Speed Dialing and Broadcasting” on page 17.

Note: One touch buttons and speed dial codes must have been previously programmed.

Receiving a fax

How faxes are received depends on how the Answer Mode is set.

TEL Answer Mode

If the Answer Mode is set to TEL, you must manually receive faxes.

1Answer the telephone.

2If you hear fax tones, press the Start/Copy button.

3Once you hear fax tones from both machines (this may take several seconds), you may hang up the telephone.

FAX or TAM/FAX Answer Mode

If the Answer Mode is set to FAX or TAM/FAX, the fax machine will answer the telephone, automatically detect fax tones, and receive a fax.

Tip! If you answer the telephone and hear fax tones, press the Start/Copy button to receive the fax.

Q-5