HP C7100 manual Display shows the wrong language, To set your language and country/region

Page 79

Troubleshooting and support

Chapter 5

I connected the USB cable, but I am having problems using the HP All-in-One with my computer

Cause The USB cable was connected before the software was installed. Connecting the USB cable before prompted can cause errors.

Solution You must first install the software that came with the HP All-in-One before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions.

Once you have installed the software, connecting your computer to the HP All-in-One with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer.

For more information on installing the software and connecting the USB cable, see the Setup Guide that came with the HP All-in-One.

The display shows the wrong language

Solution You can change the language settings at any time from the Preferences menu.

To set your language and country/region

1.Press Setup.

2.Press to highlight Preferences, and then press OK.

3.Press to highlight Set Language, and then press OK.

4.Press to scroll through the languages. When the language you want to use appears, press OK.

5.When prompted, press to highlight Yes or No, and then press OK.

6.Press to highlight Set Country/Region, and then press OK.

7.Pressto scroll through the countries/regions. When the country/region you want to use appears, press OK.

8.When prompted, press to highlight Yes or No, and then press OK.

I received a message on the display that the printer alignment failed

Cause The incorrect type of paper is loaded in the input tray (for example, colored paper, paper with text on it or, certain recycled paper).

Solution Load unused plain white letter or A4 paper into the input tray, and then try the alignment again.

If the alignment fails again, you might have a defective sensor on the print head assembly. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

76	HP Photosmart C7100 All-in-One series

Image 79

Contents HP Photosmart C7100 All-in-One series Basics Guide Hewlett-Packard Company notices Contents Index Scan Print photosPrint from your computer CopyLabel Description HP All-in-One at a glanceControl panel features Label Name and Description Use the HP Photosmart software Find more information Access the onscreen HelpHP Photosmart Mac Help appears If you want to Wired network setupSee this section Connect the HP All-in-One to the network What you need for a wired networkTo connect the HP All-in-One to the network Install the software for a network connectionTo install the Mac HP All-in-One software To install the Windows HP All-in-One softwareIntegrated wireless Wlan 802.11 network setup Connect to an integrated wireless Wlan 802.11 network What you need for an integrated wireless Wlan 802.11 networkIf you do not see your network name in the list To connect the HP All-in-One with the Wireless Setup WizardWhat you need for an ad hoc network Wireless ad hoc network setupOn the Windows Control Panel, click Security Center To disable LAN connections with Windows XPPrepare a Windows XP computer To prepare your computerPrepare a Mac Click Show Options Create a network profile for other operating systemsTo create a new network profile Select Create Network…Communication mode Ad Hoc Encryption enabled Connect to a wireless ad hoc networkTo connect to a wireless ad hoc network Connect to additional computers on a network Change basic network settings from the control panel Manage your network settingsTo run the Wireless Setup Wizard To turn the wireless radio on and off Restore network defaultsTo restore network defaults Turn the wireless radio on and offAutomatic Full Half Use the Embedded Web Server IP Address Subnet Mask Default GatewayAccess the Embedded Web Server To access the Embedded Web ServerGeneral network settings Network configuration page definitionsUse the Embedded Web Server setup wizard To access the Embedded Web Server setup wizardParameter Wired 802.3 network settingsDefault Gateway Wireless 802.11 network settings When you use the web or send an e-mail message, you use a Ssid Parameter Bluetooth settings Countries/regions with a parallel-type phone system Set up the HP All-in-One for faxingUSA Choose the correct fax setup for your home or officeSelect your fax setup case Recommended fax setup for parallel-type phone systems Other equipment/ services sharing your fax lineRecommended fax setup for serial-type phone systems Machine ServiceNot applicable Up modem, and answeringBack view of the HP All-in-One Case B Set up the HP All-in-One with DSLTo set up the HP All-in-One with a separate fax line Case a Separate fax line no voice calls receivedTo set up the HP All-in-One with DSL Fax setup To set up the HP All-in-One with a distinctive ring service Case D Fax with a distinctive ring service on the same lineCase E Shared voice/fax line To set up the HP All-in-One with a shared voice/fax lineCase F Shared voice/fax line with voice mail To set up the HP All-in-One with a computer dial-up modem To set up the HP All-in-One with voice mailCase H Shared voice/fax line with computer dial-up modem Fax Example of a parallel splitterAnswering machine Case I Shared voice/fax line with answering machineFax setup Example of a parallel splitter Fax setup Example of a parallel splitter Set the answer mode Change settings on the HP All-in-One to receive faxesSet the number of rings before answering To set the answer modeChange the answer ring pattern for distinctive ringing To test your fax setup from the control panel Test your fax setupSet the fax header To set a default fax header from the control panel To load an original on the glass Load originals and load paperLoad originals Load 10 x 15 cm 4 x 6 inch photo paperTo load 10 x 15 cm 4 x 6 inch photo paper in the photo tray Load an original in the Slide and Negative Film holderTo load 35 mm slides To load 35 mm negativesLower the lid of the HP All-in-One before starting the scan To make a copy from the control panel Avoid paper jamsMake a copy Scan an imagePress OK to select Select Computer Scan an original to a computerMake reprints of your photos Press Scan MenuPrint Preview Defaults optionScan an original to a memory card or storage device Print OptionsTo change the original type Scan slides or negative filmTo save a scan to a memory card or storage device To scan a slide or negativeTo print one or more 10 x 15 cm 4 x 6 inch photos Print 10 x 15 cm 4 x 6 inch photosPress OK to select Select to Print To print more than one copy of the selected photoTo edit the selected photo before printing To select additional photos for printingTo print from a software application Mac Print from a software applicationPrint Preview Print Now To print from a software application WindowsPress Start Fax Black again Send a basic faxPress Fax Menu Press Start Fax BlackIf you do not have another page to fax Replace the ink cartridgesTo replace the ink cartridges Use the HP All-in-One features Align the printer To clean the glass Clean the HP All-in-OneClean the glass Clean the lid backingTo clean the lid backing Clean the exteriorTroubleshooting common setup issues Uninstall and reinstall the softwareTo uninstall from a Windows computer and then reinstall To uninstall from a Mac and then reinstall Hardware setup troubleshootingHP All-in-One will not turn on To set your language and country/region Display shows the wrong languageFax test failed Fax setup troubleshootingHP All-in-One does not print Fax Connected to Active Telephone Wall Jack test failed Fax Hardware Test failedWhat to do Phone Cord Connected to Correct Port on Fax test failed Using Correct Type of Phone Cord with Fax test failedDial Tone Detection test failed Fax Line Condition test failed HP All-in-One is having problems sending and receiving faxesTroubleshooting and support Troubleshooting and support Try setting the Fax Speed to Medium 14400 or Slow HP All-in-One cannot send faxes, but can receive faxes If you hear noise, do the followingHP All-in-One is having problems sending a manual fax HP All-in-One cannot receive faxes, but can send faxes Troubleshooting and support Troubleshooting and support Fax tones are recorded on my answering machine Telephone wall jack Wired network setup troubleshooting Network setup troubleshootingTo make sure your network connection is active Received a System Requirements Error No TCP/IPPrinter not Found screen appears during installation To establish an active network connectionTo print the network configuration Wireless setup troubleshootingYou do not see the Ssid Error message Cannot connect to network Weak signalCause An invalid WEP key was entered Error message Invalid WEP KeyError message Invalid passphrase Network software installation troubleshootingError message More than 1 SecureEZ Setup access point found To clear a paper jam from the rear door Clear paper jamsCannot print Calibration errorInformation on ink cartridges Ink cartridge messagesInk expiration near Ink cartridge problemInk cartridges are empty Ink cartridges are expiredNon-HP ink Print head assembly is stalledOriginal HP ink depleted Replace ink cartridges soon To clear the print head assemblyPrint head failure Printer alignment failedWrong ink cartridges installed Phone support period Placing a call Additional warranty optionsSupport process HP support by phonePaper tray capacities Paper specificationsPrint specifications System requirementsPhysical specifications Copy specificationsScan specifications Fax specificationsRegulatory model identification number Environmental specificationsInk cartridge warranty information Regulatory noticesWarranty Index Negatives Basics Guide 111 112