To load 35 mm negatives
1.Raise the lid and remove the Slide and Negative Film holder and the lid backing. Set the lid backing aside where it will not get damaged or dirty.
2.Unfold the holder so that the negative film portion is on top and the film opening is on the right side.
3.Slide the negative film into the center of the holder so that the front of the image faces away from you and appears backward.
4.Place the holder on the glass and match the bottom edge with the bottom edge of the glass. Then, match the right tab on the top half of the holder with the right edge of the glass.
5.Lower the lid of the HP
To load 35 mm slides
Note The HP
Use the HP
Basics Guide | 59 |