To make a copy from the control panel
1.Make sure you have paper loaded in the input tray.
2.Load your original print side down in the right front corner of the glass.
3.Press Start Copy Black or Start Copy Color to begin copying.
Scan an image
You can start a scan from your computer or from the HP
To use the scan features, the HP
●On a Windows computer, look for the HP Digital Imaging Monitor icon in the Windows system tray (at the lower right side of the screen, near the time) to verify the software is running.
Note Closing the HP Digital Imaging Monitor icon in the Windows system tray can cause the HP
●On a Mac, the software is always running.
Tip You can use the HP Photosmart Software (Windows) or HP Photosmart Mac Software (Mac) to scan images, including panorama images. Using this software, you can also edit, print, and even share your scanned images. For more information, see the onscreen Help that came with the HP
To save a scan to a memory card
1.Make sure your memory card is inserted into the appropriate slot on the HP
2.Load your original print side down in the right front corner of the glass.
3.Press the Scan Menu button.
4.Press to highlight Scan to Memory Card, and then press OK.
The HP
To scan a photo and reprint it
1.Press Reprints.
2.When prompted, load your original photo print side down on the right front corner of the glass, and then do one of the following:
To reprint your original photo using the default print settings
➔Press Print Photos.
To change print settings before reprinting your original photo
a.Press OK.
HP All-in-One overview
Basics Guide | 13 |