HP All-in-One overview
Chapter 1
7.Repeat steps 2 through 5 for each ink cartridge you are replacing.
8.Close the ink cartridge door.
Clean the HP All-in-One
To ensure that your copies and scans remain clear, you might need to clean the glass and lid backing. You might also want to dust the exterior of the HP
●Clean the glass
●Clean the lid backing
●Clean the exterior
Clean the glass
Glass that is dirty from fingerprints, smudges, hair, and dust on the main glass surface slows down performance and affects the accuracy of some features.
To clean the glass
1.Turn off the HP
2.Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.
Caution Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device.
3.Dry the glass with a dry, soft,
4.Turn on the HP
Clean the lid backing
Minor debris can accumulate on the white document backing located underneath the lid of the HP
To clean the lid backing
1.Turn off the HP
2.Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.
20 | HP Photosmart C5100 |