Following four events will be displayed

Installing the Data Analyzer

Installing the Analyzer Software

However, the prompt Display> indicates that pdisplay is ready for interactive commands, and you can still use it for this installation verification procedure.

Use help or ?? to display the possible commands.

The next command (see below) will display the first four events in the sample capture file. Here the option “-e 1 4” selects the first four events. (Refer to the display and options commands in Chapter 3, “Data Analyzer Commands,” on page 25) After this command has been successfully performed, proceed to the section on “Configuring the Analyzer” on page 23.

Display> display /var/opt/acc/log/sample.eve -e 1 4

The following four events will be displayed:


event	0001	Chan:00	00:00:00.000
lead status:		RS DTR		CS DSR CD
event	0002	Chan:00	00:00:00.788

LAPB:INFO	C Addr01 Nr4 Ns7
X.25:CALL REQUEST
mod8	LCI 20

	Called addr		46500561
	Calling addr		46500561
event	0003 Chan:00 00:00:00.917
	LAPB:INFO	C Addr03 Nr0 Ns4
	X.25:INCOMING CALL
	mod8	LCI 1
	Called addr		46500561
	Calling addr 46500561
event	0004 Chan:00		00:00:00.927
	LAPB:INFO	C Addr01 Nr5 Ns0
	X.25:CALL ACCEPTED
	mod8	LCI 1
	Called addr		Addr length = 0
	Calling addr Addr length = 0

Total events =251, events displayed =4

Display>

Chapter 2