Data Analyzer Commands
options
options
The options command shows or sets the display options.
Format
options [set <string>] or:
options [show] or:
options [default]
Description
The options command sets the display options for subsequent display or run commands. Once set, the options remain in effect until altered, or until pdisplay is restarted. The following options are available:
a | Display raw data in ASCII8. |
b | Display raw data in EBCDIC. |
c | Display raw data in compressed ASCII |
| as __). |
h | Display raw data in HEX. |
s/S | Display raw data as single line (s) or all (S). |
e/E | Turn off/ON Event number and timestamp display. |
l/L | Turn off/ON Lead change display. |
r/R | Reverse the sense of DTE/DCE. |
u/U | Turn off/ON Level 2 header decode. |
v/V | Turn off/ON Level 2 raw display (s/S option gives raw |
| mode). |
w/W | Turn off/ON Level 3 header decode. |
x/X | Turn off/ON Level 3 facilities decode. |
y/Y | Turn off/ON Level 3 raw display (s/S option gives raw |
| mode). |
32 | Chapter 3 |