Data Analyzer Commands
help
help
help displays help information on available commands, and details on each of the commands.
Format
??[command]
or:
?[command]
or:
help [command]
Examples
Display> ??
Help table
Command | - Description |
?, ?? | - Help, or help on command |
help | - Display this list |
show | - Display the analyzer ZLUs |
shutdown | - Shutdown pcapture daemon |
run | - Run the analyzer on a given pair of ZLUs |
stop | - Stop the analyzer on a given pair of ZLUs |
runc | - Create analyzer ZLUs and run the analyzer |
stopd | - Stop the analyzer and delete the ZLUs |
display | - Display data from a .eve file |
options | - Set or show display options |
protocol | - Display/select L2 L3 protocol |
exit | - Exit this program |
/e | - Exit this program |
For more information about a command type “? XX” where XX is the command
For example, to get more help on the stop command use:
Display> ?? stop
Format stop ZLU
This command stops the analyzer running on the ZLU specified and its partner ZLU. It will shutdown the two ZLUs and close the capture file.
Chapter 3 | 31 |