Data Analyzer Commands
run
run
The run command starts the analyzer on a specified pair of ZLUs.
Format
run ZLU
Description
The run command starts the analyzer running on a specified ZLU. It will automatically find the associated partner ZLU so that the correct DCE and DTE ZLUs are started together.
Specify the capture file. If not given it will be defaulted | |
| to /var/opt/acc/log/anz_ZLU.eve where ZLU is the |
| number specified in the command. |
Specify the maximum size of the capture file. If not | |
| given, a default size of 1Mbyte will be used. Once this |
| file size is reached, the capture halts. |
Set the display options (refer to the options command | |
| for details of option setting). Note the option settings |
| modified in this command will change the default |
| options for the next display command. These options |
| only have an immediate effect if the follow option is |
| used. |
Set follow mode. In this mode the capture is started | |
| and then the program goes into display mode, |
| displaying the data as it is stored into the capture file. |
| The display mode uses the previously defined options |
| plus any modifications in a |
| command. |
Specify LCN masking for events to be stored into the | |
| capture file. If no LCN masking is given then all X.25 |
| L2 and L3 traffic is stored into the file. If masking is |
| specified then only L3 traffic with matching LCN |
| numbers is stored. A maximum of 6 LCN numbers may |
| be specified. |
Chapter 3 | 35 |