Home Automation 20A00-1 Setup Areas Consoles, SET-UP Areas Thermostats, Setup Areas Messages

BUTTONS 25-32 AREAS:

1	2	0=CLR ↕
BUTTONS 33-40 AREAS:
1	2	0=CLR ↕
BUTTONS 41-48 AREAS:
1	2	0=CLR ↕
BUTTONS 49-56 AREAS:
1	2	0=CLR ↕
BUTTONS 57-64 AREAS:
1	2	0=CLR ↑

SETUP AREAS: CONSOLES

To assign consoles to areas, from the Setup Areas menu, press the 4 (CONS) key.

Each console must be assigned to one and only one area. A console may be set to global, which allows it to access areas other than its assigned area through security arming and the "go to" function.

CONSOLE 1		AREA:	1
1-2			↓
CONSOLE 1		GLOBAL:	1
0=NO	1=YES		↕
THROUGH
CONSOLE 8		AREA:	1
1-2			↕
CONSOLE 8		GLOBAL:	1
0=NO	1=YES		↑

SET-UP AREAS: THERMOSTATS

To assign thermostats to specific areas, from the Set-up Areas menu, press the 5 (TEMP) key.

Thermostats can be set up so that they can only be controlled from a specific area or from all areas. PESMs and Temperature Sensors can only be controlled from a single area, as specified in SETUP AREAS.

THERMOSTAT 1 AREAS:

1	2	0=CLR ↓
THROUGH
THERMOSTAT 4 AREAS:
1	2	0=CLR ↑

SETUP AREAS: MESSAGES

To assign messages to specific areas, from the Setup Areas menu, press the 8 (MSG) key.

Page 42