Preparing Cable
The following cable are required to install and use the
Cable
E
Installing SOC-920(P)
1.Choose an installation site that can sufficiently support the weight of the equip- ments to be installed.
2. Attach the supplied template to the installation site, drill pilot holes (5 mm diam | E |
eter, min. 35 mm depth), and then install and secure the supplied plastic |
|
anchors (HUD 5). |
|
3. Arrange them so that they will not be damaged or aught on anything when |
|
installing the camera |
|
4.Remove the DOME COVER to install the CAMERA.
1)Use the supplied L WRENCH to unfasten the 4 BOLTS for CASE fixing by turning them counter- clockwise as shown in the illustration.
2)Disassemble the
5.Install the CAMERA.
Align the CAMERA’s installation holes to the holes where the PLASTIC ANCHORS are inserted and then fasten the ASSY SCREW- TAPPINGS (TH M4 X 30) with O RINGS.
(2 spots)
1)
2)
➜
12 | 13 |