ChecAA king the remote controller
•Point the remote controller towards the remote controller receiver of the indoor unit.
•When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator(
) appears on the remote controller display.
Remote controller buttons
Remote controller display 
Virus Doctor
Set the Virus Doctor function on/off.
Smart Saver
Less energy usage makes your space cool between the temperature range of 24°C~30°C.
Turbo
Operate in auto fan speed to cool quickly.
Temp + -
Increase/Decrease the temperature by 1˚C.
Temp/Humi
(Has no this funtion.)
Auto Clean 
Auto clean function – Dry inside of the indoor unit to get rid of odor.
On Timer 
Set the On Timer on.
Off Timer
Set the Off Timer on.
Filter Reset
(Has no this funtion.)
Beep off
(Has no this funtion.)
Display off
To turn off the display light
Power 
Turn on/off the air conditioner.
Mode
Set one of the 4 operating modes (see pages 10~11 for instructions).
Quiet
Air swing 
Activate/Deactivate air flow blade movement automatically up and down.
Fan | |
| |
Adjust how much air flows through the air conditioner with the 4 different fan speeds such as Auto/Low/Medium/High.
d'light Cool
(Has no this funtion.)
Set the | mode on. |
Set /Cancel |
|
Cancel the timer/
mode .
2ndF
Switch the function of the button on the remote controller.
• When you press [2ndF] button, the
indicator will be displayed on the remote controller and you can change
the functions on the remote controller as listed below.
Auto Clean Filter Reset, Temp/Humi Beep Off, good’sleep Display Off function.
If you select the function under the button while the function of the button is switched by 2ndF button, the 2ndF function is canceled.
8
P18���������
.indd