Samsung AS24VBFNUMG manual Cleaning the indoor unit, Cleaning the outdoor unit heat exchanger

Page 19

CleanAA ing the air conditioner

•Make sure the power is turned off and unplugged from

the wall socket when cleaning the air conditioner.

Cleaning the indoor unit

Wipe the surface of the unit with a slightly wet or dry cloth when needed.

• Contact the service center when you clean the indoor unit

heat exchanger because it needs to be disassembled.

• Do not clean the display using alkaline detergent.

• Do not use sulfuric acid, hydrochloric acid, organic solvents (such as thinner, kerosene and acetone etc.) to clean the surface of the product or put any stickers on it. They may damage the surface of the air conditioner.

Cleaning the outdoor unit heat exchanger

When dust accumulates on the heat exchanger, it may decrease cooling performance. Therefore, clean it regularly.

Spray water to clean the dust.

• If it is difficult to clean the outdoor unit heat exchanger on

your own, contact service center.

• Be careful with the sharp edges on the outdoor unit heat exchanger.

Opening the panel

Open the front panel by pulling tabs on the lower right and left sides of the indoor unit.

Detach the front panel by pulling it forwards.

ENGLISH

Heat exchanger

(Illustration may differ slightly depending on the models)

19

UMG_AQ&AS18V@_IBIM_34038A_E--P14�P18��.indd 19

2013-3-18 11:00:12

Image 19

Contents English Contents Wall socket SafetAA y precautionsImportant safety symbols and precautions Follow directionsFor Using For Cleaning Operation ranges ChecAA king before useChecAA king the name of the parts Mode indicator Auto clean indicatorSet temperature Mode indicator Room temperatureRemote controller buttons ChecAA king the remote controllerInserting the batteries Remote controller displayBattery changing time Storing the remote controllerBasicAA function Press the button to set the desired fan speed Press the button to adjust the temperatureVertical air flow Using the Turbo functionPress the Air swing button on the remote controller AdjusA ting the air flow directionSet Off timer AA modePress the button on the remote controller Press the Set/Cancel button to active it onPress the On Timer/Off Timer button SettinAA g the On/Off timerPress the On Timer/Off Timer button to set the time If the air conditioner is on If the air conditioner is off From the moment you have set the timerTurn off automatically Using the dlight Cool function Using the Smart Saver functionUsing the Virus Doctor function Runs UsingAA the Auto Clean functionUsing the Quiet function When the air conditioner is turned onHeat exchanger Cleaning the indoor unitCleaning the outdoor unit heat exchanger Opening the panelDry the Air filter in a ventilated area Cleaning the air filterRemoving the Air filter Open the panel and put the Air filter outClose the front panel Deodorizing and Bio filterPeriodical checks MainAA taining the air conditionerTroubAA leshooting Flow movement changes. It is normal TroubleshootingConnection General information Safety precautions a place where the air filter can be replaced easily Choosing the installation locationInstalling the unit Power supply line, fuse or circuit breakerOutdoor Unit Where sulfide gas existsModel  Figure Description ChoosingAA the installation locationWhen installing more than 1 outdoor unit When the air outlet is towards the wallAccessories in the indoor unit case AccessoriesAccessories in the outdoor unit case Tools for test operations Fixing the installation plateOptional accessories Tools required for installation General ToolsCable specification Connecting the assembly cableConnecting the cable Each wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryCut off the remaining foam insulation Smooth the cut edgesPut a flare nut slightly into the pipe and modify the flare PurgiAA ng the indoor unitCutting or extending the pipe Unscrew the caps at the end of each pipeOuter Diameter Drain hose installationChanging direction of the drain hose Ensure that condensation draining is adequate Purging the connected pipesAQseries Connect a drain hose to the drain plugAdding Refrigerant Gas service port as seen in the pictureIf you use a pipe shorter than 4 or 5m Fixing the indoor unit in place PerfoAA rming the gas leak testsFixinAA g the outdoor unit in place Outdoor unit installed on the wall by rackPress the Air swing button and check the following Press the Mode button to select Cool modePress the Power button to stop the operation Check the followingsInsulation tape to finish AAHow to connect your extended power cablesApply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withAQ18VBFUMG AQ24VBFUMG TechnAA ical SpecificationsQuestions or COMMENTS? Air Conditioner