Napco Security Technologies GEM-P1664 Factory Default Description, WI1424A 1/06 55 

Page 55

WI1424A 1/06

Page 55 

 

 

 

GEM-P1664 FACTORY DEFAULT DESCRIPTION

 

 

The Factory Program of the GEM-P1664 will change with the release of the new version that complies with Security Industry As- sociation False Alarm Reduction Control Panel-01 Standard (SIA FAR CP-01).

Out of Box Panel Operation

The following describes the new panel factory defaults:

The new SIA CP-01 compliant versions of the GEM-P1664 panels have a factory program that allows a locally functioning alarm panel out of the box, programmed with all the non-reporting features required by the SIA CP-01 standard.

The new versions of the panels are manufactured with the following factory programmed features:

1.All zones (64 in the GEM-P1664) are programmed for Priority, Selective Bypass, Alarm Output, Keypad Sounder on Alarm and Abort Delay.

2.Default User 1 Code = "123" and it is set up to arm Area 1 and be a user program code.

3.Keypad Time/Date Display enabled.

4.The reporting format is Ademco, Silent Knight Slow.

5.Touch Tone with Rotary Back-up is enabled.

6.Exit Delay = 60 seconds.

7.Entry Delay 1 and 2 are both 30 seconds.

8.AC Fail Report Delay is 60 minutes.

9.Alarm and Pulse Alarm time-outs are 5 minutes.

10.Chime is set to 2 seconds.

11.Change Pulse Alarm to Cadence Alarm is enabled.

12.Auto Reset after Burglary Output Timeout is enabled.

13.1422-Bit 6 "Chirp Output on Keyfob Arm/Disarm" is enabled.

14.1424-Bit 0 "Automatic Interior Bypass/Easy Exit" is enabled.

15.1423-Bit 7 "Select Alarm Output for Keyfob Chirp" is enabled.

16.2053-Bit 0 "Exit Time Restart" is enabled.

17.2053-Bit 1 "Sound Alarm on Exit Error" is enabled.

18.2053-Bit 3 "Enable CP-01 Limits" is enabled.

19.1417 "Abort Delay" is changed to 30 seconds.

20.Cancel Time ("Cancel Window Duration") is set to zero minutes.

The complete Easy Programming menu will appear upon initial entry into Dealer Program Mode. Subsequent entry into Dealer Program Mode allows only a subset of the Easy Program Menu.

With this new SIA CP-01 compliant panel, the Easy Program Menu has been increased to allow several additional features to be programmed in the Menu, rather than requiring that these features be programmed through the Direct Address programming method. Note: Upon entering Dealer Program Mode, the above referenced factory program is immediately cleared and the "Prior to CP-01 Changes" (see below) factory program is loaded. Therefore, if you enter Dealer Program Mode, you will be re- quired to first enter Easy Program Mode and answer Easy Program Mode questions before making any needed changes to the factory program via Direct Address Programming Mode.

Once the panel is removed from its box, you have three choices: (1) Do not enter Dealer Program Mode and complete the in- stallation using the unmodified factory program; (2) Upload the Factory Default Program (above) to PCD-Windows, make de- sired changes, and re-download this modified PCD-Windows program back to the panel; (3) Enter Dealer Program Mode in or- der to allow the EZ Program Menu to appear, then answer "Yes" to the question "Enable CP-01 Features?".

A critical addition to the Easy Program Menu is the question “Enable CP-01 Features? Y/N”. If the answer to this question is “No” then the following changes to the program occur:

1.All zones (64 in the GEM-P1664) are programmed for Priority, Selective Bypass, Alarm Output, Auto Reset and Swinger Shutdown. Only the zones selected by the first EPM question “How many Zones” are programmed for Area 1.

2.Default User 1 Code = "123" and it is set up to arm Area 1 and be a user program code.

3.Keypad Time/Date Display enabled.

4.All zones are programmed with report codes and as burg/fire alarm types depending on whether they were selected as fire zones. Zones not selected as fire are burg type.

5.The reporting format is selectable in the Easy Program Mode.

6.Touch Tone with Rotary Back-up is enabled.

7.Exit Delay = 60 seconds.

8.Entry Delay 1 and 2 are both 30 seconds.

9.AC Fail Report Delay is 60 minutes.

LNAPCO Security Systems

X GEM-P1664 Installation Instructions

Page 54 Page 56
Image 55
Page 54 Page 56
Contents System Ready 09/01/05 1200 AM Napco WI1424A 1/06Changes from Previous Edition Important NoticeTable of Contents Page WI1424A 1/06 FeaturesGEM-P1664 Installation Instructions Lnapco Security Systems IntroductionWI1424A 1/06 5  Communicator FeaturesGEM-P1664 SpecificationsSystem Components Optional Accessories and PeripheralsOrdering Information Ordering InformationResidential Smoke Detectors, 4-WireSmoke detectors & Summary of UL Requirements Summary of UL RequirementsGrounding InstallationMounting Control PanelAdding Expansion Zones WiringWiring Wireless SystemsSignal Strength Testing/Wireless Systems Testing the SystemWI1424A 1/06 11  PGM Outputs Wiring ConnectionsSIREN/BELL Power Auxiliary PowerWI1424A 1/06 13  Wiring Connections Remote Bus & Earth GroundRemote BUS Earth GroundEZ Zone Doublingtm Configuration WI1424A 1/06 15  Wire Smoke DetectorsTelephone Lines Wiring Connections Telephone LinesMode Keypad Configuration ModeKeypad Installation Configuring the KeypadsZone Response Keypad Configuration ModeCompatibility Number Not Applicable EZM AddressTouchpad Back Light Keypad ConfigurationDisable Sounder Keypad AddressBasic Operation Basic OperationUser Codes & Zone Descriptions Arming Arming and Disarming the SystemAuto Arming Not for UL Installations Bypassing Zones Alarm IndicationDisplay ZN Faults WI1424A 1/06 23 Display ZN Directory Display Fire AlarmReset System Trbl Display ZN BypassedActivate Download Enable Dealer ModeEnable User Mode Activate ProgramKeypad Messages Keypad MessagesWI1424A 1/06 27  AC Failure AC-Fail Report DelayGlossary GlossaryAmbush Keypad Ambush Ambush Codes Enable Global Ambush Alarm OutputsAreas Zone Area 1-Zone Area 4 Priority Area Arming WI1424A 1/06 29  Auto Status DisableBackup Report on Telco 1/Telco BatteryData Format Chime ZoneChirp Output on Keyfob Arm/Disarm Cold StartDate/Time WI1424A 1/06 31 Disable Call Waiting on 1st Attempt Dial-Tone Detection Disable Auto Dial-Tone DetectionDigital Dialer Report Enter/Exit Test Mode Disable Call Waiting Touch-tone Dialing OnlyWI1424A 1/06 33  Exit/Entry Follower Enable CP-01 LimitsEnable TCP/IP Communications Enable Telephone Line Fault TestWI1424A 1/06 35  Keypad Area Assignments KeyFob Arm/Disarm chirp of Alarm OutputInterior Stay Bypass KeyFob Control of Relay Groups 1WI1424A 1/06 37  Never Arm Do not use for primary Burglary protection Power-Up DelayPre-Dial Delay Memory FailureWI1424A 1/06 39  Report Telco 1 Report Telco 3 Double or Split Reporting Report Digital Dialer Exit Error/Recent ClosingSelect Alarm Output for Keyfob Chirp Relay Follows ZoneWI1424A 1/06 41  Temperature Display at Keypad Not evaluated by UL Tamper EZM Tamper Keypad Tamper RF Tamper Wireless TamperSwinger Shutdown WI1424A 1/06 43  Trouble on Open Trouble on Short Not for UL installations WI1424A 1/06 45  Wire, 4-Wire Smoke Detectors See Smoke Detectors Hour ZoneZone Status Battery Calculation Worksheet STANDBY-BATTERY Calculation WorksheetStandby WI1424A 1/06 47  Wiring LegendKeypad Programming Modes Function Mode49  Keypad Programming Modes Dealer ModeB456 123 D Keypad Programming Modes Easy Menu ModeWI1424A 1/06 51  Keypad Programming Modes User ModeKeypad Programming Modes Keypad Configuration Mode Keypad Configuration ModeProgramming Address WI1424A 1/06 53 Location Is selected in the Easy Program Menu WI1424A 1/06 55  GEM-P1664 Factory Default DescriptionOut of Box Panel Operation Out of Box Panel Operation Prior to CP-01 Changes WI1424A 1/06 57  FCC StatementPage GEM-P1664 Wiring Diagram GEM-P1664 Wiring Diagram59  Napco Limited Warranty

GEM-P1664 specifications

Napco Security Technologies has long been a leader in the security industry, recognized for its innovative solutions that enhance safety and monitoring capabilities. One of its standout products is the GEM-P1664, a versatile and robust control panel designed for both residential and commercial security applications. This advanced system combines user-friendly features with cutting-edge technology, making it an ideal choice for those looking to bolster their security measures.

The GEM-P1664 boasts a 16-zone configuration, allowing users to monitor multiple areas within a property simultaneously. Each zone can be independently programmed, providing flexibility in how security is managed. This feature is particularly valuable for larger facilities or homes with multiple entry points, as it ensures that all areas are adequately protected. The panel supports both hardwired and wireless zones, delivering versatility to suit various installation preferences.

One of the core technologies integrated into the GEM-P1664 is the use of Event Management and Reporting tools. The panel can automatically log security events, sending alerts via email or SMS in real-time. This capability is essential for maintaining awareness of security status, allowing users to respond promptly to any unauthorized access or unusual activity.

The user interface of the GEM-P1664 is designed with simplicity in mind. Its intuitive layout and navigation make it easy for both trained professionals and everyday users to operate the system without extensive technical knowledge. Additionally, the panel supports multiple user codes, allowing different levels of access for family members or staff, enhancing both security and convenience.

Another notable characteristic of the GEM-P1664 is its compatibility with various Napco peripherals and add-ons, including motion detectors, door/window sensors, and surveillance cameras. This interoperability enables users to create a comprehensive security ecosystem tailored to their specific needs. Furthermore, the GEM-P1664 is also compatible with mobile applications, allowing clients to monitor their security systems remotely via smartphones or tablets.

Lastly, the GEM-P1664 is built with future-proofing in mind. It is designed to be easily upgradable, ensuring that users can incorporate the latest technological advancements and security features as they become available. This forward-thinking approach ensures that the investment in the GEM-P1664 remains relevant and effective over time.

In summary, the Napco Security Technologies GEM-P1664 control panel is a powerful and flexible solution for anyone looking to enhance their security infrastructure. With its robust zone configuration, user-friendly interface, advanced reporting capabilities, and compatibility with a range of devices, the GEM-P1664 stands out as a top choice in the security technology landscape.
Top Page Image Contents