Honeywell Vista-50P/Vista-50PUL manual Custom Word Substitutes for VIP Module Annunciation

Custom Word Substitutes for VIP Module Annunciation

A substitute word can be programmed for each of the 20 custom words used in your alpha zone descriptions. The VIP Module announces this substitute word in place of the custom word that is displayed on the alpha keypad. For example, an alarm display of "John’s Bedroom" could be announced as "Son’s Bedroom," as there is no annunciation for the custom word "John." Note that if a substitute word is not assigned, the VIP Module will not annunciate the zone descriptor at all, but will only annunciate the zone number.

To enter custom word substitutes, do the following:

1.From Data Field Programming Mode, press #93 to display the "ZONE PROG?" prompt.

2.Press [0] (NO) to each menu option until the "CUSTOM INDEX ?" prompt is displayed.

PROMPTEXPLANATION

CUSTOM INDEX ?
1=YES 0=NO	0

CUSTOM WORD NO. 00=QUIT

01 ENTER INDEX #

Enter [1] at this prompt.

Enter the custom word number (01-20) for which a voice substitute is desired. Enter 00 to quit this Programming Mode.

Press [✱] to accept entry.

Enter the 3-digit substitute word index number from the Relay Voice Descriptors and Custom Word Substitutes Vocabulary list in the Relay Voice Descriptors part of this section.

Press [✱] to accept entry.

The "CUSTOM WORD NO." prompt is displayed. Enter the next custom word number to be substituted, or enter 00 to quit.

– 30 –