SVAT Electronics CLEARVU11 instruction manual General Information, Main Screeen

GENERAL INFORMATION

MAIN SCREEEN

SVAT ELECTRONICS

now you can see

NOTE: The following instructions are described for use with the remote control. Front panel buttons may not match with the following directions. It is recommended that you use the included mouse or remote for full function.

You must be logged in to access all the DVR menus. Please refer to page 13 for login instructions.

The split-window screen, as shown above, is the main screen after system start-up. There are two types of on screen viewing modes, 1-Window and 4-Window. The system will remember the last viewing mode before normal shutdown.

In addition to the split windows, the system time is displayed on the lower-left corner, the hard drive information on the lower-right corner, and the scrolling event messages (if shown while certain events occur), across the bottom.

The system information, from left to right at the bottom of the screen, is described as the following:

(1)SEQ display ON/OFF or playback state – SEQ icon shown for SEQ display ON, other icons for different playback states.

(2)Backup state – Backup icon shown for backup.

(3)Manual record ON/OFF – REC icon shown for ON.

(4)Current Zoom – x1, x2, or x4.

(5)Mute state –Speaker icon shown for not mute, not shown for mute.

(6)Alarm recording percentage.

(7)Normal recording percentage.

CLEARVU11 9