MAIN MENU
RS-232/422/485 SETUP
SVAT ELECTRONICS
now you can see
In Setup Menu display, press ▲▼ to change the highlighted option to
The
Following is a brief description for each item and its specific operations:
•Device Type – PTZ or N/A (Not Available). Press +/- buttons to change the type. Please note that PTZ can only be selected for either
•Model – PTZ model of the connected devices. The PTZ models supported include Pelco D protocol Dome, SamSung
•Baud Rate – press +/- buttons to change the value. This is a specific value defined by your PTZ camera. Please consult your PTZ manual for the baud rate and protocol.
•Data Bit – press +/- buttons to change the value.
•Stop Bit – press +/- buttons to change the value.
•Parity – (Odd, Even, or None). Press +/- buttons to change the value.
•DVR/Camera ID – for PTZ - the device ID for this digital video/audio recorder, and it must not conflict with the other devices connected in the same control port. Press +/- buttons to change the ID. Consult your PTZ manual for instructions on changing the PTZ ID.
The general operations are as below:
•▲▼◄►- Press these buttons to select the items.
•MODE - Press this button to call up Optional
•ESC (MENU/ESC) - Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog box is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.
CLEARVU11 | 33 |
|
|