MAIN MENU
SVAT ELECTRONICS
now you can see
Video loss settings are very important for surveillance, since anytime you lose footage, you lose valuable information. The Clearvu11 can perform various tasks when it detects loss of any video, depending on howit is setup. You can adjust the settings for each individual camera.
In Camera Setup, press ENTER to call up Video Loss Setup of the selected camera as shown when the highlighted option is on Settings in the Video Loss row for the camera you wish to setup. Each camera will have its own settings and can be different from the other 3 cameras.
The Video Loss Setup allows the administrator to define how the system responds to the detected video loss for the camera.
The following is a brief description for each item and its specific operations:
Duration – this displays how long (in seconds) the Alarm Out relay and the Buzzer will keep being triggered after video loss is detected for this camera. The Alarm Out relay and the Buzzer will be reset immediately once the camera returns to normal. Press +/- buttons to adjust the value (3
Alarm Out – to define which Alarm Output will be triggered when video loss of this camera is detected. Press +/- buttons to select none (N/A) or one of the Alarm Outputs
Buzzer – used to activate the internal Buzzer or not when video loss of this camera is detected. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.
Log – this selection allows you to create an event log (or not) when the system detects video loss. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.
Screen Message – this selection allows you to display the event message on the screen (or not). A message will appear on the scrolling information section at the bottom of the display. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.
The general operations are as below:
•▲▼- Press these buttons to select the items.
•Numeric
• COPY ( | ) - Press this button to copy the Video Loss settings of the focus camera to all the following |
| cameras. (E.g. focus camera is 1, its Video Loss settings will be copied to those of cameras |
•ESC (MENU/ESC) - Press this button to escape from this screen, and return to Camera Setup display. If the Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.
CLEARVU11 | 19 |
|
|