SVAT Electronics CLEARVU11 instruction manual SEQ Display Setup

Page 28

MAIN MENU

SVAT ELECTRONICS

now you can see

•Post-record– to define how long after this alarm input is triggered the Focus Camera shall be intensively recorded at Event Record IPS. Press +/- buttons to adjust the value (0 second - 60 minutes, discrete).

• Alarm Out – to define which Alarm Output will be triggered when this alarm input is triggered. Press +/- buttons to select none (N/A) or one of the Alarm Outputs (1-2).

•Buzzer – to activate the internal Buzzer or not when this alarm input is triggered. Press ENTER or +/- to check/ uncheck this item. The default setting is “” - checked.

•Log – allows you to either log an event or not. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.

•Screen Message – to display the event message on the screen or not. Press ENTER or +/- to check/uncheck this item. The default setting is “” - checked.

•E-mail– to send an event e-mail to a pre-determined email or not. The e-mail will be sent to the predefined receivers when the event is triggered. Press ENTER or +/- to check/uncheck this item. The default setting is “–” - unchecked.

The general operations are as below:

•▲▼◄►- Press these buttons to select the items.

•Numeric (CH1-CH4) - Press these buttons to select the alarm input.

•COPY ( ) - Press this button to copy the settings of the focus alarm input to all the following alarm inputs. (E.g. focus alarm input is 1, its settings will be copied to those of alarm inputs 2-4.)

•ESC (MENU/ESC) - Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.

SEQ DISPLAY SETUP

In Setup Menu display, press ▲▼ to change the highlighted option to SEQ Display, and then press ENTER to call up SEQ Display Setup as shown.

The SEQ Display Setup allows the administrator to define the display pages while in SEQ Display for main monitor and call monitor. There are 1 display type - 1-Window for main monitor, and 1 display type for call monitor.

CLEARVU11	25

Image 28

Contents 4CH 15 LCD-DVR All-In-One System VersionIMPORTANT! Please Read Do not Return this Product to the StoreProduct Warranty Information Table of Contents HDD FORMAT/CLEAR Power Cables IntroductionFor DVR 10ft RJ-45 Cable Software CDButton Functions and Connections Remote Control Infrared IR Sensor Power Cord Inlet Power in For DC-INMonitor Speaker Hard Drive CoverBasic Setup Alpa/Numeric keysAdjust cameras to the desired viewing angles Mounting the CameraPowering the System General Information Main ScreeenGeneral Information Press to move the cursor to the left/rightStop Stops using playback mode Volume Turns muting on or offMenu Used to call up the full menu Search Used to call up the search optionsPTZ Setup Using the Mouse Common IconsALPHA-NUMERIC Keyboard Main MenuPress these buttons to change the highlighted item Enter Press Enter to login the system Enter+/-Press these buttons to adjust the selected item Press these buttons to select the itemsMain Menu PRE-CAMERA Setup Camera Setup TitleCopy Motion Detection Main Menu Covert Call by EventAudio Dwell TimeRecord Quality and Record IPS Alarm Setup Focus Camera the camera corresponding to this alarm inputSEQ Display Setup Following is a brief description of the operations Scheduled Record Setup HDD Setup Main Menu SEQ Clear Mode FormatCall Physical Format Password Setup System Setup System TimeRS-232/422/485 Setup Network Setup Use the keys to navigate over to E-mail or AdvMail Setup Advanced Network Setup Software Upgrade Administrator mode only Factory DefualtsGenuine and fully updated version of Windows XP or Vista Connecting Your DVR to the RouterNetworking Guide Finding the DVR’S IP Address Press ESC to exit out of Menu. Press Enter to save changesPreparing Your Computer for Viewing the DVR Method 1 RecommendedViewing Your DVR on Your Computer MethodNetworking Guide Once YOU are on PORTFORWARD.COM Connecting the DVR Using a D-LINK Router Example Select the Advanced tabReason to change the DVR to another port not recommended Finding Your External IP AddressSchedule field, select Always Click Apply Enter your preferred user name, email address, and password Dynamic DNSNetworking Guide Select Setup Select Network DSL modem is preventing a connectionRemote Viewing Camera Focus windowSearch by Time Search by EventSystem Requirements of Remote PC Setup- Click on this icon to call up Setup dialogMemory Dram 512MB Search Menu Search by TimePlayback/Archive For Search By Time Search Menu Search by Event Search Archived Files Playback/Archive For Search By EventPDA/Mobile Phone Remote Access Playback For Archived FilesHEM Player Keyboard Control Simulator Information Sheet M4V/H.264 to AVI Conversion UtilityTroubleshooting Guide Saved in loginWhen playing back MouseSettings VGA Options is notDVR EtcRemote control is not WorkingSet time IPS to 30 IPSText ManualComputer Cameras My camera is notWhite Electrical noiseSpecifications Alarm SetupNetwork ControlPower ResolutionBattery Operable Viewing Angle ConnectorTV System AutoCLEARVU11 Product Information Quick Start Guides