MAIN MENU
SVAT ELECTRONICS
now you can see
HDD FORMAT/CLEAR
In HDD Setup display, press MODE to call up HDD Format/Clear screen as shown.
The HDD must be formatted before it can be used to record video/audio. The HDD Format/Clear screen allows
the administrator to format and/or clear each HDD, and set the size for Alarm Record option and Normal Record option for each HDD.
The general operations are as below:
•MODE - Format
Press this button to format the HDD. A confirmation dialog will be shown on the screen, press ENTER to confirm, or ESC (MENU/ESC) to cancel. Please note that it will take a few minutes to format the HDD.
NOTE: If the HDD has not been formatted yet, it will be formatted and split up with default record size, 30% for Alarm record and 70% for Normal record. If it has been formatted before, it will be formatted according to the Alarm REC Size (%) and Normal REC Size (%) displayed on the screen, but the previously recorded
contents within the new size won’t be cleared and will be accessible.
•SEQ - Clear
Press this button to clear the HDD. A confirmation dialog will be shown on the screen, press ENTER to confirm, or ESC (MENU/ESC) to cancel.
•CALL - Physical Format
Press this button to physically format the selected HDD. A confirmation dialog will be shown on the screen, press ENTER to confirm, or ESC (MENU/ESC) to cancel. Please note that the recording will be always optimized for performance & lifetime no matter if it’s the first time or the one hundredth time. The formatting of the HDD would only take about 1 minute. We strongly recommend that the user use this physical format function to format the HDD for the first time.
NOTE: The HDD will be physically formatted and split up with default record size, 30% for Alarm record and 70% for Normal record. All the previously recorded will be erased.
CLEARVU11 | 30 |
|
|