SVAT Electronics CLEARVU11 instruction manual Mail Setup

MAIN MENU

E-MAIL SETUP

SVAT ELECTRONICS

now you can see

In Network Setup, press ENTER to call up E-mail Setup as shown when the highlighted option is E-mail.

The E-mail Setup allows the administrator to set all e-mail related parameters. When an event occurs and E-mail is enabled for the corresponding action, an e-mail will be sent based on the parameters set here. Contact ISP or E-mail provider to acquire the SMTP server and authentication information.

The general operations are as below:

•▲▼- Press these buttons to select the items.

•ESC (MENU/ESC) - Press this button to escape from this screen, and return to Network Setup display. If the Save dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.

Following is a brief description for each item and its specific operations:

•SMTP Server – SMTP mail server name. Please contact your email provider for this information.

•Authentication – whether the SMTP mail server requires authentication. Press ENTER or +/- to check/ uncheck this item.

•Username – username if the SMTP mail server requires authentication.

•Password – password if the SMTP mail server requires authentication.

•Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails

•Mail To #1-5– the receivers’ e-mail addresses. The system can send the e-mails originated from the triggered events to up to 5 different receivers.

•Attachment – attached picture for the e-mail sent. The value could be (N/A, Original picture, QCIF picture). Press +/- buttons to change this item.

CLEARVU11 35