2 Getting Started
A. Design and Installation Considerations
Heat & Glo
CAUTION
Check building codes prior to installation.
•Installation MUST comply with local, regional, state and national codes and regulations.
•Consult local building, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.
When planning an appliance installation, it’s necessary to determine the following information before installing:
•Where the appliance is to be installed. See Sections 3 and 4.
•The vent system configuration to be used. See Sections 5 and 6.
•Gas supply piping. See Sections 7 and 9.
•Electrical wiring. See Sections 7 and 10.
•Framing and finishing details. See Sections 3, 6 and 11.
•Whether optional
WARNING
Fire Risk
Explosion Risk
Keep appliance dry.
•Water may damage controls.
•Mold or rust may cause odors.
6 | Heat & Glo • |