Heat & Glo LifeStyle SL-550TV-IPI-D Framing and Clearances, Selecting Appliance Location

Page 9

3 Framing and Clearances

	NOTE:			WARNING
	•	Illustrations reﬂect typical installations and are FOR
		DESIGN PURPOSES ONLY.	Fire Risk
	• Illustrations/diagrams are not drawn to scale.
			Provide adequate clearance:
	•	Actual installation may vary due to individual design
			•	Around air openings
		preference.
			•	To combustibles

			•	For service access
	A. Selecting Appliance Location		Locate appliance away from trafﬁc areas.

When selecting a location for your appliance it is important to

consider the required clearances to walls (see Figure 3.1). NOTE: For actual appliance dimensions refer to

Section 16.

A
F
TOP VENT
B
ALCOVE	D
INSTALLATION	D
A
B
C
TOP VENT

TOP VENT

B

E

	Model		A	B	C	D	E	F

	SL-550TV-D	Inches	41-1/2	37	58-3/4		16-1/4	1/2

		Millimeters	1054	940	1492		413	13
		Millimeters	1054	940	1492		413	13
						36 Inches
		Inches	45	42	63-3/4	36 Inches	16-1/4	1/2
	SL-750TV-D	Inches	45	42	63-3/4	914 Millimeters	16-1/4	1/2
						914 Millimeters
		Millimeters	1143	1067	1619	Maximum	413	13
						Maximum


	SL-950TV-D	Inches	50	49	70-3/4		16-1/4	1/2

		Millimeters	1270	1245	1792		413	13
		Millimeters	1270	1245	1792		413	13

In addition to these framing dimensions, also reference the following sections:

•Clearances and Mantel Projections (Sections 3.C and 3.D)

•Vent Clearances and Framing (Section 6).

ÎFigure 3.1 Appliance Locations

Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. J • 4/07

9

Image 9

Contents What to do if you smell gas Homeowner Reference Information CongratulationsTable of Contents Glass Speciﬁcations 1Listing and Code ApprovalsBTU Speciﬁcations ModelsHigh Altitude Installations Non-Combustible Materials SpeciﬁcationCombustible Materials Speciﬁcation Getting Started Design and Installation ConsiderationsNegative Pressure Inspect Appliance and Components Tools and Supplies NeededSelecting Appliance Location Framing and ClearancesClearances Constructing the Appliance ChaseClearances to Mantels or other Combustibles above Appliance Mantel ProjectionsVent Termination Minimum Clearances Termination LocationsVent Information and Diagrams Vent GuidelinesVent System Conﬁguration Minimum Vertical Feet Vent Clearances and Framing Pipe Clearances to CombustiblesVertical Penetration Framing Installing Outside Air Kit Damper Assembly Appliance PreparationGas and Electrical Connections Proper Positioning, Leveling and Securing of a Securing and Leveling ApplianceAssembly of Vent Sections Installing Vent PipeSecuring Vent Sections Attaching Vent to FireboxFuel Conversions Gas Connection Gas InformationGas Pressures Pressure Natural Gas PropaneHigh Altitude Installations Connecting to the Appliance Recommendation for WireIntelliﬁre Ignition System Wiring Optional Accessories RequirementsGround to Standing Pilot Ignition System WiringWall Switch Installation for Fan Optional Junction Box InstallationFacing Material FinishingClean the Appliance Appliance SetupAccessories Remove Shipping MaterialsPositioning the Logs Log Set Assembly LOGS-SL550-D Models SL-550TV-DTAB Locator Log Set Assembly LOGS-SL750-D Models SL-750TV-D, SL-950TV-D Notches Raised Flat Spots Shutter Settings Glass AssemblyScreen Mesh Grilles and TrimBefore Lighting Appliance Operating InstructionsCheck Appliance Draft Before operating this appliance have a qualified technicianIntelliﬁre Ignition Lighting ApplianceStanding Pilot Ignition For Your Safety Read Before Lighting InstructionsFrequently Asked Questions Initial Break-in ProcedureAfter Appliance is Lit Troubleshooting Symptom Possible Causes Corrective ActionsStanding Pilot Ignition System Symptom Possible Cause Corrective Action TroubleshootingIntelliﬁre Ignition System Symptom Possible Causes Corrective Actions Before servicing Maintaining and Servicing ApplianceInspect Maintenance Tasks Appliance Dimension Diagram Appliance Dimensions TableReference Materials Log Set Assembly Service PartsSL-550TV-D Service Parts ListSL-550TV-D, SL-550TV-IPI-D SL-750TV-D SL-750TV-D SL-750TV-D, SL-750TV-IPI-D SL-950TV-D SL-950TV-D SL-950TV-D, SL-950TV-IPI-D SL-550 / 750 / 950TV-D SL-550 / 750 / 950TV-D-IPI Limited Lifetime Warranty Heat & GLO GAS Appliance Products Limited Lifetime WarrantyDo not Discard this Manual Contact Information