INSTALLATION
ACCENT KIT INSTALLATION
1)Remove the rivets from the surround by pulling out the hoseclamp with a screwdriver or plyer.
5)Remove the 2 studs on the sides of the Hood. Insert the new studs through the holes and secure them by fi rst putting on the washer and then tighten with a nut.
2)Takethehoseclampsandputthemoverthebackofeachrivet.Squeeze the hoseclamp to secure onto rivets ensuring that the hoseclamp is touching the back side of the surround. The hoseclamp can now be released.
3)Remove the handles by removing the nut and screw. Install the new handles by placing them in position over the holes on the surround louver. Put the screws through the holes and secure them by tightening them with a nut.
DOUBLE & SINGLE DOOR OPTION
1)Remove the handles by removing the nut and screw. Install the new handles by placing them in position over the holes on the door(s). Put the studs through the holes and secure them by tightening them with a nut.
4)Place the emblem over the emblem design on the surround. Insert the studs through the holes. To secure them fi rst put on the split lock washer and then the nut and tighten.
32 | Excalibur® P90 Zero Clearance Direct Vent Gas Fireplace |