14 | SIDE BURNER TROUBLESHOOTING | |
|
|
|
|
|
|
PROBLEM | CHECK | CURE |
|
|
|
Side Burner does not light. | Is gas supply off? | Turn supply on. |
| The excess fl ow safety device, which is part | To reset the excess fl ow safety device turn all burner control knobs and the cylinder |
| of the barbecue to cylinder connection, may | valve off. Disconnect the regulator from the cylinder. Turn burner control knobs to |
| have activated. | START/HI. Wait at least 1 minute. Turn burner control knobs to “OFF”. Reconnect |
|
| the regulator to the cylinder. Turn cylinder valve on slowly. Refer to “Lighting Instruc- |
|
| tions”. |
|
|
|
Flame is low in “HI” position. | Is the fuel hose bent or kinked? | Straighten hose. |
|
|
|
Push button ignition does not work. | Does burner light with a match? | If match lights burner, check igniter (see Sideburner Maintenance). |
|
|
|
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in the “OFF” position.
Make sure black wire is connected between the igniter and electrode.
1)Igniter Wire
2)Ground wire
3)Burner
(3)
Make sure white wire is connected between the igniter and grounding clip. Spark should be a white/blue color, not yellow.
Side Burnerer Grate |
Side Burner Capcap |
Side Burner Ringg& Head |
Igniter Electrode |
ControlrolKnob |
Igniterter |
WWW.WEBER.COM®