Weber 89796 manual Side Burner LP Supply Connections, Connect GAS Supply

8 GAS INSTRUCTIONS

DANGER

Use of any other hose and regulator assembly could be dangerous, and may not provide adequate gas supply to the Summit® Built-In gas grill, and could result in a fire or an explosion causing serious bodily injury or death, and damage to property.

DANGER

Failure to use the Summit® Built-In Tank Cabinet for a 20 lb cylinder or failure to build a LP cylinder enclosure for a 20 lb cylinder following the requirements for ventilation, cylinder retention and separation of the LP cylinder from a heat source, listed in the ANSI Standard for Outdoor Cooking Gas Appliances, ANSI Z21.58 CSA 1.6, could be dangerous, and could result in a fire or an explosion causing serious bodily injury or death and damage to property.

If you do not follow the DANGER statements exactly, the Warranty on the Summit® Built- In gas grill will be voided.

CONNECT GAS SUPPLY

1)Uncap the fl are fi tting from the optional side burner connection located inside the

Summit® Built-In Tank Cabinet (#21280).

Note: We strongly recommend that you use the Summit® Built-In Tank Cabinet (#21280) for installations using a 20 lb LP cylinder, mounted remotely in an “island” structure.

If your, licensed contractor or licensed plumber, builds an LP cylinder enclosure following the guidelines in the ANSI Standard for Outdoor Cooking Gas Appliances, Z21.58 CSA 1.6, you need to order kit number (#21287).

2)Connect the corrugated gas line to the side burner Connection.

a.

1

4 5

2 3

	SIDE BURNER LP SUPPLY CONNECTIONS
1	Corrugated Gas Line to Manifold
2
	Plug unused hole with supplied plug
3
	Use bushing for gas line hole
4
	1/2” (12.7mm) Flared Gasket
5	90° Fitting
6	Cap (Optional Side Burner)
7
	To SIde Burner
8
	Connection to LP Tank

aTop of Box

bBack of Box

cSide View

b.

6

c.

a.

2

b.

7

c.

5

8

WWW.WEBER.COM®