ROTISSERIE
ASSEMBLY
You will need: Rotisserie Motor Bracket(1), Rotisserie Motor(1), Rotisserie Shaft(1) and Spit forks(2)
1. Install the motor bracket
Attach the motor bracket onto the left side of the cook box by mounting the bracket key holes over the welded bolts on the cooking box.
Push the bracket down to lock into position.
2. Attach the motor
Slide the motor onto the motor bracket.
3. Put the Spit Forks on the Rotisserie Shaft
Slide a spit fork from each side onto the shaft so that the tines are facing each other.Reverse forks to each other so that one fork screw is on top and one is on the bottom.as shown in illustration Screw in the split fork screws to hold the forks in place.
4. Insert the Rotisserie Shaft in the Motor
Insert the pointed end of the rotisserie shaft into the motor.
6.Set the Rotisserie Shaft onto rotisserie support block.
Place the handle end of rotisserie onto the support rollers.
24