ION IPROFILE quick start TOP Panel Overview, Raise / Lower Lever Raises and lowers the tonearm

TOP PANEL OVERVIEW

1.Platter – Put the record you would like to play here. (Note: Make sure that the slipmat is always placed on top of the platter while using the turntable. Failure to use the slipmat may cause damage to your media as well as damage to the turntable.)

2.Raise / Lower Lever – Raises and lowers the tonearm.

3.Arm Clip – This specially designed arm clip secures the tone arm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked.

Note: When transporting the turntable, we recommend placing the plastic cover over the cartridge to prevent damage to the needle.

4.Cartridge and Headshell – The cartridge is pre-mounted on a standard headshell. The cartridge is user replaceable and compatible with a variety of standard cartridges. Be sure to remove the clear plastic cover before operating the turntable from the cartridge.

1

5

2

3

4

5.Dock – Connect your iPod to this dock. Please make sure that your iPod fits snuggly over the dock connector but do not force it! For a proper fit and more stable connection, first insert the Dock Adapter that came with your iPod. The dock allows you to record your vinyl directly to your iPod or to play back music from your iPod through the turntable’s audio output. When connected to the dock, you can sync your iPod to your iTunes music library if the iPROFILE is connected to your computer via USB. The iPROFILE is compatible with the following iPod models:

iPod Model	Playback	Record
iPod
7th generation (Classic)
6th generation (Classic)
5th generation
4th generation
3rd generation*
1st and 2nd generation
iPod Nano
4th generation (nano-chromatic)
3rd generation
2nd generation
1st generation
iPod Shuffle
iPod Mini
iPod Touch
2nd generation***
1st generation**

*On the 3rd generation Forward” are supported. unsupported.

iPod, only the buttons “Play”, “Rewind”, and “Fast Buttons “Select”, “Menu”, and “Rec Mode” are

**On the 1st generation iPod Touch, only music player navigation is supported.

***On the 2nd generation iPod Touch, you can record with a third-party recording application such as iProRecorder.

Note that your turntable can also charge your iPod while it is docked. When not recording, the turntable will automatically charge your iPod. To ensure the best recording quality and to prevent unwanted noise from entering your recordings, iPod charging will be automatically disabled when you begin recording and re-enabled when you stop recording. We do understand, however, that you may be recording long sessions which require your iPod to remain charged for longer periods of time. While recording, you can turn on iPod charging by pressing << and >> simultaneously. You can turn it off at any time by pressing << and >> again.

2