4 Getting Started | Installer Guide |
|
A. Typical Appliance System
NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual
| HORIZONTAL |
Note: Dual venting configurations | TERMINATION CAP |
(SECTION 10.L ) | |
ARE NOT allowed. Appliance MUST |
|
be vented EITHER vertically OR |
|
horizontally. |
|
| VERTICAL TERMINATION CAP |
| (SECTION 10.I) |
| ||
MAINTAINS MINIMUM CLEARANCE |
| |
AROUND PIPE (SECTION 10.G) |
| |
| STORM COLLAR | |
| (SECTION 10.H) | |
| VENT PIPE PENETRATES ROOF | |
| PREFERABLY WITHOUT AFFECTING | |
| ROOF RAFTERS (SECTION 8.C) | |
VENT PIPE (SECTIONS 7 and 8) | ATTIC INSULATION SHIELD (NOT | |
SHOWN) MUST BE USED HERE TO KEEP | ||
| ||
| INSULATION AWAY FROM VENT PIPE IF | |
| ATTIC IS INSULATED (SECTION 8.D) | |
CEILING FIRESTOP |
| |
ON FLOOR OF ATTIC |
| |
(SECTION 8.C) |
| |
| FRAMING HEADED OFF | |
FRAMING/HEADER | IN CEILING JOISTS | |
(SECTION 8.C) | ||
(SECTION 5.B) | ||
|
OPTIONAL
WALL SWITCH
MANTEL AND
MANTEL LEG (SECTION 5.E, 13.A)
SURROUND
HEARTH EXTENSION
GAS LINE (SECTION 11)
Figure 4.1 Typical System
Hearth & Home Technologies • DV3732SBI, DV3732SBIL • | 15 |