Hearth and Home Technologies DV3732SBI Vent Diagrams Top Vent Horizontal Termination One Elbow

F. Vent Diagrams

1.Top Vent - Horizontal Termination One Elbow

Note: Use SLP Series components only.

WARNING**

Fire Risk.

•When using SLP-HRC-SS and SLP-HRC-ZC-SS termination caps on top vented fireplaces, a one foot minimum vertical vent section is required

before installing first elbow.

•When using DVP-TB1 termination cap on top vented fireplaces, a three foot minimum vertical vent section is required before installing first elbow.

V1 Minimum**		H1 Maximum
90 Elbow Only**		2 ft.	610 mm
1/2 ft.**	152 mm	2 ft.	610 mm
1-1/2 ft.**	457 mm	3 ft.	914 mm
2-1/2 ft.**	762 mm	5 ft.	1.5 m
3-1/2 ft.	1.1 m	7 ft.	2.1 m
4-1/2 ft.	1.4 m	15 ft.	4.6 m

H1 MAX. =15 ft. (4.6 m)

V1 + H1 MAX. = 40 ft. (12.2 m)

** See Warning.

H1

Note: There MUST be a 25% reduction in total H when using flex vent except when using the simple up and out installation (see Figure 7.3).

V1

Figure 7.4

24 Hearth & Home Technologies • DV3732SBI, DV3732SBIL • 2215-900 Rev. F • 9/12