INSTALLATION INSTRUCTIONS
upper corner of the curved left hand log. See Fig. 12b. Note, the top resting position of the central log is angled to the left.
Fig. 12b
6) Place 2x smaller twigs as shown in Fig. 12b. |
Note, the bottom of the twigs rest between the |
stove body and burner. Take care with the right |
FITTING AND ARRANGING THE LOGS (LPG ONLY)
Ensure the appliance is cold
Safety Notice - Please see SAFETY NOTICES ref. Coal / Log set, page 3.
Warning: The logs and matrix are fragile, ensure they are handled carefully.
Ensure location is correct. Do not force the matrix into position. If any of the logs and/or rear matrix is damaged, they must be replaced with genuine Aarrow parts.
Warning: An incorrect log layout may cause soot to build up inside the stove and therefore invali- date the guarantee.
hand twig to avoid impinging upon the pilot |
assembly. |
7) Take the remaining small twig and large twig |
and place as shown in Fig 12c. The log layout is |
now correct. |
A
D
B
C
Fig. 12c
GF
E
Fig 13
Key For Contents To LPG Log Set -
A = Y Shaped Rear Log
B = Loose Embers
C = Curved Log
D = Straight Log
E = 1x Medium Twig
F = 3x Small Twig
G = 2x Large Twigs
How to arrange the logs
1)Position the Y shaped log across the rear of the burner, standing up against the rear of the firebox and behind the burner. See Fig. 14a.
2)Scatter the loose embers over the burner, taking care not to cover the pilot assembly. See Fig. 14a.
16 | Aarrow Sherborne GSL CF |