Aarrow Fires Gas Stove user manual Assemble Motor

Page 19

INSTALLATION INSTRUCTIONS

ASSEMBLE MOTOR

1)Remove the front cover from the valve. This is done by unscrewing the small pozi screw, located by knob B. Unclip the right hand side of the cover located to the side of knob A. See Fig. 16a & b.

Tab

Screw

Knob B

Knob A

Fig. 16a

Fig. 16b

2)Remove the cover and dispose of the spacer tube fitted with the screw.

3)Position the motor onto the location lugs (arrow X) and engage the drive gear onto knob B (arrow Y).

X

Y

Fig. 16c

Fig. 16d

4)Replace valve cover, ensure clip is located before the pozi screw is tightened. Do not over-tighten the screw as this may effect the operation of the control.

5)Take the micro switch and fix to the front of the valve cover with the self tapping screw provided. Switch is located onto the lug moulded within the valve cover, next to knob B. See Fig. 16e.

Wiring

Knob B

Connections

Micro Switch

Fig. 16e

Aarrow Sherborne GSL CF

19

Image 19
Contents Sherborne GSL Guarantee ContentsSpare Parts Safety Notices Installation InstructionsGeneral Information Fit for purpose Stove locationPacked details Unpacking noteMain Box Statutory Requirements Installation Instructions Important NoticesCertification Min. Heat Setting Installation Instructions Technical DataInstalling the Stove Max. Heat SettingStove must not be installed against a combustible wall Installation Instructions Preparation of the StoveStove Location Non-Combustible shelf clearances Installation Instructions Shelf ClearancesInstallation Instructions Flue System Rear Flue Options Closure PlatesTOP Flue Options =See Graph Pressure Test Sequence Installation Instructions Connecting the GAS SupplyFitting and Arranging the Coals Both NG & LPG versions Fitting and Arranging the Logs NG only How to arrange the logsFitting and Arranging the Logs LPG only Installation Instructions For a Manual Stove Without Remote Control Proceed to Installation of Remote Control SystemAssemble Motor Slot Assemble ReceiverHandset Commissioning the Stove Fire TestingAdvise the end user Checklist Servicing Replacement of the Glass Servicing Burner and Valve Assembly RemovalCleaning Outer Surfaces Servicing Annual ServiceSee Safety Notices ref coal set OSD Pilot Fault DiagnosisDate of Visit Company Work Carried Out Signature Annual Service RecordAdditional Notes User Instructions User Instructions Lighting & Controlling the Fire To turn the stove and the pilot off User InstructionsDo not try to force the control, wait the 60 seconds Temperature Display Remote Control Set the display from *C/24 h to *F/12 h and vice versa Thermostat and Timer Remote ControlProgramming the Desired Set Temperature Programming the TimerAutomatic Mode Auto in display for Temperature Control User Instructions User Instructions Important Notices User Instructions Shelf Clearances Part Description Visual Aid Part Number Spare PartsSpare Parts AFGS010 Aocshb Options & AccessoriesRemoteshb TraceshbPlease complete the following for you own records GuaranteeAdditional Notes ’ve checked it and it’s O.K