Aarrow Fires Gas Stove user manual Advise the end user

Page 23

INSTALLATION INSTRUCTIONS

Advise the end user

1.That there will be an odour from the stove when the stove is first lit and is non-toxic. It is advised that the stove is initially run with the room well ventilated to disperse the fumes.

2.How the valve controls operate and how to light the pilot.

3.Advise about leaving pilot on.

4.That the stove is fitted with two safety devices, one cuts off the stove if for any reason the gas supply is turned off - A flame failure devise.

The second will cut the stove off if there is inadequate flue draw for example a blockage in the chimney. If this occurs the stove should not be re-lit until the stove and flue have been checked by a qualified gas engineer.

5.To read the users instructions before using the stove.

6.The stove must never be used if the glass is cracked or broken.

7.Explain that the working surfaces of the stove will get hot and that no combustible materials including clothing, furniture and furnishings (including curtains) must not be placed within one metre of the stove.

Leave the instruction manual with the end user

Aarrow Sherborne GSL CF

23

Image 23
Contents Sherborne GSL Spare Parts ContentsGuarantee General Information Installation InstructionsSafety Notices Fit for purpose Stove locationPacked details Unpacking noteMain Box Certification Installation Instructions Important NoticesStatutory Requirements Min. Heat Setting Installation Instructions Technical DataInstalling the Stove Max. Heat SettingStove Location Installation Instructions Preparation of the StoveStove must not be installed against a combustible wall Non-Combustible shelf clearances Installation Instructions Shelf ClearancesInstallation Instructions Flue System TOP Flue Options Closure PlatesRear Flue Options =See Graph Pressure Test Sequence Installation Instructions Connecting the GAS SupplyFitting and Arranging the Coals Both NG & LPG versions Fitting and Arranging the Logs NG only How to arrange the logsFitting and Arranging the Logs LPG only Installation Instructions For a Manual Stove Without Remote Control Proceed to Installation of Remote Control SystemAssemble Motor Slot Assemble ReceiverHandset Commissioning the Stove Fire TestingAdvise the end user Checklist Servicing Replacement of the Glass Servicing Burner and Valve Assembly RemovalSee Safety Notices ref coal set Servicing Annual ServiceCleaning Outer Surfaces OSD Pilot Fault DiagnosisDate of Visit Company Work Carried Out Signature Annual Service RecordAdditional Notes User Instructions User Instructions Lighting & Controlling the Fire Do not try to force the control, wait the 60 seconds User InstructionsTo turn the stove and the pilot off Temperature Display Remote Control Set the display from *C/24 h to *F/12 h and vice versa Thermostat and Timer Remote ControlProgramming the Desired Set Temperature Programming the TimerAutomatic Mode Auto in display for Temperature Control User Instructions User Instructions Important Notices User Instructions Shelf Clearances Part Description Visual Aid Part Number Spare PartsSpare Parts AFGS010 Aocshb Options & AccessoriesRemoteshb TraceshbPlease complete the following for you own records GuaranteeAdditional Notes ’ve checked it and it’s O.K